Publication
Hybrid sequential deposition process for fully textured perovskite/silicon tandem solar cells
Related publications (49)
Rationalizing Performance Losses of Wide Bandgap Perovskite Solar Cells Evident in Data from the Perovskite Database
Christian Michael Wolff, Tor Jesper Jacobsson
Metal halide perovskites (MHPs) have become a widely studied class of semiconductors for various optoelectronic devices. The possibility to tune their bandgap (E-g) over a broad spectral range from 1.2 eV to 3 eV by compositional engineering makes them par ...
Weinheim2023Passivating contact-based tunnel junction Si solar cells using machine learning for tandem cell applications
Christophe Ballif, Franz-Josef Haug, Aïcha Hessler-Wyser, Audrey Marie Isabelle Morisset, Hyunjung Park
Tandem solar cells are a key technology for exceeding the theoretical efficiency limit of single-junction cells. One of the most promising combinations is the silicon-perovskite tandem cells, considering their potential for high efficiency, fabrication on ...
ELSEVIER2023Contact Design for Silicon Heterojunction Solar Cells
Today more than ever the world needs clean energy sources and thus a fast deployment and scaling up of the photovoltaic industry. In this context improving solar cell efficiency plays a major role. In order to achieve the maximum single junction efficiency ...
EPFL2022Electrical Losses Mitigation in Silicon Heterojunction Solar Cells
To overcome the worldwide challenges of climate change, photovoltaics is foreseen to play a significant role in the world electricity production. Nowadays, single junction crystalline silicon (c-Si) based solar cells hold the largest share of the global ph ...
EPFL2021Multimodal Microscale Imaging of Textured Perovskite-Silicon Tandem Solar Cells
Christophe Ballif, Quentin Thomas Jeangros, Florent Sahli, Alan Richard Bowman, Jérémie Werner, Fan Fu, Chien-Jen Yang
Halide perovskite/crystalline silicon (c-Si) tandem solar cells promise power conversion efficiencies beyond the limits of single-junction cells. However, the local light-matter interactions of the perovskite material embedded in this pyramidal multijuncti ...
AMER CHEMICAL SOC2021Development of Highly Efficient Perovskite-on-Silicon Tandem Solar Cells
Crystalline Silicon (c-Si) solar cells are dominating the photovoltaic (PV) market. Owing to their large manufacturing capacity, reliability and efficiency, c-Si solar cells are now cost-competitive with other non-renewable electricity sources in many plac ...
EPFL2020Dual Passivation of CsPbI3 Perovskite Nanocrystals with Amino Acid Ligands for Efficient Quantum Dot Solar Cells
Ulf Anders Hagfeldt, Jianhua Liu
Inorganic CsPbI3 perovskite quantum dot (PQD) receives increasing attention for the application in the new generation solar cells, but the defects on the surface of PQDs significantly affect the photovoltaic performance and stability of solar cells. Herein ...
2020Revealing the Perovskite Film Formation Using the Gas Quenching Method by In Situ GIWAXS: Morphology, Properties, and Device Performance
Sandy Sanchez Alonso, Ulf Anders Hagfeldt, Rodrigo Szostak
The optoelectronic properties, morphology, and consequently the performance of metal halide perovskite solar cells are directly related to the crystalline phases and intermediates formed during film preparation. The gas quenching method is compatible with ...
2020Performance of perovskite solar cells under simulated temperature-illumination real-world operating conditions
Michael Graetzel, Wolfgang Richard Tress, Ulf Anders Hagfeldt, Konrad Domanski, Essa Awadh R Alharbi, Brian Irving Carlsen, Anand Agarwalla
Since reaching 20% efficiency, research in perovskite photovoltaics has shifted from a race for efficiency to a race for stability. For efficiency, the standard test conditions set the rules for the race. However, the term 'stability' is used very broadly ...
NATURE PUBLISHING GROUP2019RbF post deposition treatment for narrow bandgap Cu(In, Ga)Se-2 solar cells
Multi-junction solar cells are known to have a considerably increased efficiency potential over their typical single junction counterparts. In order to produce low cost and lightweight multi-junction devices, the availability of suitable narrow (< 1.1 eV) ...
ELSEVIER SCIENCE SA2019