Publication

Rapid, Robust, and Relevant (R3) Reactivity Test for Supplementary Cementitious Materials

Related publications (38)

Characterisation and hydration kinetics of beta-C2S synthesised with K2SO4 as dopant

Karen Scrivener, Franco Alberto Zunino Sommariva, Shashank Bishnoi, Sreejith Krishnan

In this study, a protocol for synthesising beta-C2S using K2SO4 as a dopant has been reported. Quantitative X-Ray diffraction was used to characterise synthesised samples. It was observed that it is possible to synthesise beta-C2S with high purity (>96 wt% ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Preparation of high-conductivity, high-capacity phase change media capsules with enhanced thermos-chemical stability in thermal energy storage applications

Selmar Rudolf Binder

Thermal energy storage using the effects of the latent heat in the solid-liquid phase transformation has found its way into every day applications. Reusable, organic phase change media stabilize low temperatures of parcels, and salt/water tanks act as buff ...

EPFL2019

Low-temperature curing strength enhancement in cement-based materials containing limestone powder

Franco Alberto Zunino Sommariva

With the ongoing sustainability movement, the incorporation of limestone powder in cementitious binders for concrete in the U.S. has become a subject of renewed interest. In addition to accelerating the early age hydration reactions of cementitious systems ...

Springer2017

Impact of water activity on the stability of ettringite

Karen Scrivener, Thomas Matschei

The stability of ettringite as function of temperature and water vapour pressure was studied on synthetic samples using X-ray diffraction, thermogravimetric analysis, sorption balance measurements and different calorimetry techniques. Crystalline ettringit ...

Pergamon-Elsevier Science Ltd2016

The filler effect, due to the physical presence of mineral additions in cement, is mainly known to accelerate the hydration of the clinker component. Previously, this was attributed to the surface of the filler providing nucleation sites for C-S-H as there ...

Wiley-Blackwell2014

Heat Management for Process Intensification of Fast Exothermic Reactions in Microstructured Reactors

Julien Haber

Nowadays, the production in fine chemical and pharmaceutical industry is mostly carried out in large scale batch reactors having typically dimensions of a few meters to satisfy the demand of the market. Even though this technology has been widely used and ...

EPFL2013

Strain Hardening Ultra High Performance Fiber Reinforced Concrete (SH-UHPFRC) were used successfully over the last 8 years in numerous cast in place rehabilitation applications as long lasting waterproofing layers (20 to 30 mm thickness) and, combined with ...

EPFL2013

Kinetics Of Desorption Of Water, Ethanol, Ethyl Acetate, And Toluene From A Montmorillonite

John Christopher Plummer, Pascal Clausen

Desorption processes of low-molecular-weight compounds from the surface of smectites into the gas phase determine a number of processes, e.g. those involved in drug delivery and the release of herbicides. The desorption has not been investigated thoroughly ...

Clay Minerals Soc2013

Methods for determination of degree of reaction of slag in blended cement pastes

Karen Scrivener, Emmanuel Gallucci, Vanessa Kocaba

To measure the degree of reaction of slag in blended pastes, five methods were studied. Selective dissolution and differential scanning calorimetry are shown to be unreliable, SEM-BSE-IA-mapping is time consuming, but does provide good results with a reaso ...

Elsevier2012

Experimental DSC-based method to determine glass transition temperature during curing of structural adhesives

Thomas Keller, Anastasios Vassilopoulos, Omar Moussa

A new DSC-based experimental method to efficiently establish the glass transition temperature, Tg, vs. curing degree, α, relationship for structural adhesives was developed. The method approaches the continuous Tg-α relationship with a trilinear curve esta ...

Elsevier2012

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.