In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We present an assessment of the mechanical constitutive behavior after irradiation for a tempered martensitic steel, Eurofer97', and for Zircaloy by means of small-ball punch tests. For that purpose we use a finite-element model of the punch test device. W ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
An assessment of the true stress-true strain relationship has been done by means of tensile and small ball punch tests on austenitic and tempered martensitic steel at room temperature. A finite element model was developed and validated to calculate the for ...
The attachment of the first wall modules of the ITER FEAT fusion reactor is designed using flexible connectors made from titanium alloys. An assessment of the tensile and fatigue performance of two candidate alloys, a classical two phase Ti6Al4V alloy and ...
Plastic deformation under uniaxial longitudinal tension and compression is investigated for pure aluminum reinforced with a high volume fraction of parallel alumina fibers. The matrix sub-structure is also examined in transmission electron microscopy. The ...
The procedures followed to produce Y2O3-dispersed EUROFER 97 powder ready to be compacted and hot isostatic pressing processed are reported. An attrition mill has been used under controlled conditions. The compositional and microstructural characterization ...
Titanium alloys have been identified as candidate structural materials for the first wall, the blanket and the magnetic coil structures of fusion reactors. Titanium alloys are interesting materials because of their high specific strength and low elastic mo ...
We examine, in this work, the integration and high-strain response of piezoresistive thick-film resistors on titanium and titanium alloy, as compared with ferritic stainless steel and the standard alumina substrates. In general, titanium and its alloys are ...
Irradiated 304 and 316 stainless steel samples were investigated. The steels were neutron irradiated to 1.5 and 7.5 dpa at 550 K. Similar types of steels were irradiated at 550 K with 590 MeV protons in the PIREX facility at PSI, Switzerland. The doses rea ...
