Self-sensing, tunable monolayer MoS2 nanoelectromechanical resonators

Excellent mechanical properties and the presence of piezoresistivity make single layers of transition metal dichalcogenides (TMDCs) viable candidates for integration in nanoelectromechanical systems (NEMS). We report on the realization of electromechanical resonators based on single-layer MoS2 with both piezoresistive and capacitive transduction schemes. Operating in the ultimate limit of membrane thickness, the resonant frequency of MoS2 resonators is primarily defined by the built-in mechanical tension and is in the very high frequency range. Using electrostatic interaction with a gate electrode, we tune the resonant frequency, allowing for the extraction of resonator parameters such as mass density and built-in strain. Furthermore, we study the origins of nonlinear dynamic response at high driving force. The results shed light on the potential of TMDC-based NEMS for the investigation of nanoscale mechanical effects at the limits of vertical downscaling and applications such as resonators for RF-communications, force and mass sensors.

Nano-electromechanical systems based on ultra-thin semiconductors

Sajedeh Manzeli

Nowadays, the interest in 2D materials has gone far beyond graphene. Specially, monolayers of transition metal dichalcogenides (TMDs) offer a broad spectrum of electronic and optical properties, and show the potential to revolutionize the electronics industry. The promising electronic properties of 2D semiconductors combined with their mechanical strength and flexibility, makes them ideal candidates for nanoelectromechanical systems (NEMS). This thesis focuses on realizing NEMS based on graphene and MoS2, which is one of the most appealing TMDs. First, we present the realization of graphene NEMS by fabricating single and bilayer graphene transistors featuring a doubly clamped suspended channel. The electromechanical response of monolayer graphene nanoribbons show a strain-induced increase in their electrical resistance, making it possible to estimate an upper limit for the piezoresistive gauge factor. Surprisingly, we observe oscillations in the electromechanical response of bilayer graphene. Our numerical simulations indicate that these oscillations arise from quantum mechanical interference in the transition region induced by sliding of the two graphene layers with respect to each other. Our results report on the rare observation of room temperature electronic interference in bilayer graphene. Next, we investigate the static electromechanical response of atomically thin MoS2. MoS2 exhibits high youngâs modulus and fracture strength. Furthermore, the bandgap of MoS2 is highly strain-tunable. This coupling between electrical and mechanical properties makes MoS2 a promising material for NEMS. Here we incorporate monolayer, bilayer and trilayer MoS2 in a suspended membrane configuration with the electrodes acting as mechanical clamps. Strain-induced bandgap tuning is detected via electrical conductivity measurements and the emergence of the piezoresistive effect in MoS2 is demonstrated. We observe a reversible bandgap modulation in atomically thin MoS2 membranes with a thickness dependent modulation rate. Finite element method (FEM) simulations are used to obtain the spatially varying bandgap profile on the membrane and to quantify the rate of bandgap change. The piezoresistive gauge factor is calculated for single layer, bilayer and trilayer MoS2. Our results reveal that monolayer and bilayer MoS2 show a piezoresistive effect which is comparable to the state-of-the-art silicon strain sensors and two orders of magnitude higher than in graphene. Finally, we present the investigation of MoS2 NEMS resonators working in the VHF range and featuring piezoresistive transduction. The atomic thickness of monolayer MoS2 places it as a promising candidate for miniaturization of electromechanical devices to the limits of vertical scaling. While the small mass of MoS2 leads to an increased resonant frequency and a higher mass sensitivity, the presence of piezoresistivity offers a transduction mechanism in addition to the traditional capacitive transduction. Operating in the tension-dominated regime, monolayer MoS2 NEMS resonators not only allow tunability of the resonant frequency using an external voltage, but also show the strain-induced enhancement of their dynamic range. Furthermore, the resonators are driven into the nonlinear regime allowing the study of nonlinear effects. This work sheds light on the potential of TMD based NEMS as ultra-low power switches, sensors and resonators for applications in RF range.

EPFL2018

Shunt loudspeakers for modal control in rooms

Romain Boulandet, Hervé Lissek, Pierre-Jean René

Engineers dealing with noise reduction in habitations close to transportation traffic or indus-trial facilities encounter several problems to decrease noise level in rooms at low frequencies. Passive materials and current building construction knowledge enable to avoid noise trans-mission in habitations at medium and high frequencies and the regulations based on the dBA scale can often be respected. But these regulations do not take into account the real an-noyance of noise for the inhabitants who are still disturbed by low frequency noise. Because of the modal behavior of rooms, air-borne and structure-borne noise generate high sound pressure level at the first modal frequencies, even with small amount of energy. In order to lower the annoyance induced by low-frequency behavior in rooms, huge compliant wooden panels can be used, though with quite low performances in terms of resonances damping. An alternative can be found with bass-traps, comprising a mechanical resonator and a closed-box, with fixed acoustic performance at specific frequency. Enhanced performances can even be obtained with closed-box shunt loudspeakers, where the acoustic impedance of the louds-peaker's diaphragm around its resonance can be modified (in terms of magnitude and also in frequency) by way of a simple passive electrical device, providing the requested complemen-tary complex acoustic impedance for perfect absorption at the first modal frequencies. The present work describes the design of a small array of low-frequency shunt loudspeakers, ded-icated to damp a certain amount of modes within a known room. Assessment in laboratory conditions (impedance tube, reverberant chamber) will then be presented and compared to simulations, leading to concluding remarks on practical issues on the applicability of the con-cept of shunt loudspeakers for low-frequency noise reduction in habitations.

2009

Nanomechanical Silicon Resonators with Intrinsic Tunable Gain and Sub-nW Power Consumption

Sebastian Thimotee Bartsch, Daniel Grogg, Mihai Adrian Ionescu, Andrea Lovera

Nanoelectromechanical systems (NEMS) as integrated components for ultrasensitive sensing, time keeping, or radio frequency applications have driven the search for scalable nanomechanical transduction on-chip. Here, we present a hybrid silicon-on-Insulator platform for building NEM oscillators in which fin field effect transistors (FinFETs) are integrated into nanomechanical silicon resonators. We demonstrate transistor amplification and signal mixing, coupled with mechanical motion at very high frequencies (25-80 MHz). By operating the transistor in the subthreshold region, the power consumption of resonators can be reduced to record-low nW levels, opening the way for the parallel operation of hundreds of thousands of NEM oscillators. The electromechanical charge modulation due to the field effect in a resonant transistor body constitutes a scalable nanomechanical motion detection all-on-chip and at room temperature. The new class of tunable NEMS represents a major step toward their integration in resonator arrays for applications in sensing and signal processing.

2011

Nano-electromechanical systems based on ultra-thin semiconductors

Sajedeh Manzeli

EPFL2018