Thermal Engineering of Metal-Organic Frameworks for Adsorption Applications: A Molecular Simulation Perspective
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
One possibility for the removal of volatile organic compounds (VOCs) is catalytic oxidation. For the removal of VOCs in low concentration (≲ 3000 ppmv for propane) it is not possible to sustain the required oxidation temperature over the catalyst wit ...
The aim of this work was to operate the steam reforming of methanol and the total oxidation of methanol in a microstructured two-passage reactor. The steam reforming enables the production of hydrogen at relatively low temperatures (250 °C) with only a sma ...
From specific heat measurements of Ta + Ti alloyed Bronze Route multifilamentary Nb3Sn wires, a wide, nearly symmetric overall distribution of T-c can be determined. This is apparently in contradiction with the almost linear decrease of the Sn content towa ...
The temperature-dependent thermo-physical and mechanical properties of a pultruded E-glass fiber-reinforced polyester (GFRP) composite are investigated in this paper. Fitting of theoretical models of the material properties to results of TGA, DSC, hot disk ...
A decomposition model for resin in glass fiber-reinforced polymer composites (GFRP) under elevated and high temperature was derived from chemical kinetics. Kinetic parameters were determined by four different methods using thermal gravimetric data at diffe ...
The structure and the associated dynamics have been investigated in a series of oligopeptides of γ-benzyl-L-glutamate using DSC, WAXS, FTIR, NMR and dielectric spectroscopy, and rheology, respectively. The peptides with degrees of polymerization below 18 a ...
Mechanical and electrical connecting of piezoelectric actuator is often done using conductive glue. Its advantage is not to heat the piezoelectric actuator during connection. But there are many disadvantages to gluing; the main one is curing time. Welding ...
The project addresses the problem of chemical and mechanical stability of dense ceramic oxygen separation membrane for the partial oxidation (POX) of methane to synthesis gas. In operating conditions, the membranes are exposed to strong thermal and composi ...
Specific heat CP of zirconia and yttria stabilized zirconia doped or not with erbia and ceria was measured from 128 to 823 K and of yttria stabilized zirconia doped with erbia and plutonia from 443 to 1573 K. The new determined data were modelled using Deb ...
The fusion bonding of neat polypropylene (PP) has been investigated under non-isothermal conditions with different initial adherend temperatures, and the results compared with results from bonds prepared under isothermal conditions with identical adherend ...
