Life Cycle Analysis of Strengthening Existing RC Structures with R-PE-UHPFRC
Related publications (35)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Treatment by accelerated carbonation has been widely studied to enhance the quality of recycled concrete aggregates (RCA) and hence the performance of new concrete produced with the RCA. This is often ascribed to the densification of RCA. This study invest ...
The behavior of reinforced-concrete structural elements under moving loads involves many complex parameters related to material properties, vehicle loading, environmental changes and structural response. It is difficult to generate the real conditions of l ...
The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...
The use of cement and concrete, among the most widely used man-made materials, is under scrutiny. Owing to their large-scale use, production of cement and concrete results in substantial emission of greenhouse gases and places strain on the availability of ...
Blended cements, where Portland cement clinker is partially replaced by supplementary cementitious materials (SCMs), provide the most feasible route for reducing carbon dioxide emissions associated with concrete production. However, lowering the clinker co ...
“Structural UHPFRC” stands for Ultra-High Performance Fiber Reinforced Cementitious Composite material that is complemented by reinforcing and prestressing steel to enhance the resistance and durability of structural elements. Properties of impermeable, te ...
It is well known that control specimens used to assess the concrete strength of new structures have different casting and curing conditions than those of actual structures. Notably, after pouring of the concrete and before its hardening, a number of phenom ...
ERNST & SOHN2020
, , ,
The compressive resistance of concrete in new structures is usually characterized on the basis of tests performed on concrete cylinders or cubes under relatively rapid loading conditions. Although efficient for material characterization, these tests do not ...
ERNST & SOHN2020
By studying approximately a century of cement and concrete in Switzerland, this project examines the relations between institutions, discourse, and technology as they intersect in the material. The project is framed so that the establishment of organizatio ...
ETH Zurich2020
This work studies the effect on Embodied Energy (EE) of concrete when Ordinary Portland Cement (OPC) is partially substituted with natural Pozzolanic Volcanic Ash (VA) at the material and the building scale. The work aims to demonstrate potential improveme ...