The Effect of Yttrium Addition on the Microstructures and Electrical Properties of CuMn Alloy Thin Films
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used to study the porous and non-porous alpha-tricalcium phosphate (alpha-Ca-3(PO4)(2), alpha-TCP) prepared through a sintering procedure at 1200-1400 degrees C of beta-tricalcium phos ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
Syntheses of ZSM-5 coatings on stainless steel plates were carried out via the substrate heating method. The reaction mixture was kept at temperatures below 100 °C, while the metal plates were heated to temperatures above 100 °C. It was demonstrated that c ...
Investigation of the microstructure, properties and biocompatibility of the Ti-6Al-4V alloy nitrided under glow discharge was performed. The microstructural analyses were carried out using light microscopy, X-ray diffraction, analytical scanning and transm ...
This work presents the preliminary results on application of mineral sacrificial layer that is prepared to structure LTCC (low temperature co-fired ceramic). The proposed method suggests utilization of a sacrificial paste, which remains "permanent" during ...
Because of their outstanding mechanical and chemical properties, transition metal nitrides are widely accepted materials in the protective coatings industry. This work aims at elucidating the origin of their exceptional properties. The study concentrates o ...
Oxide dispersion strengthened steels based on the ferritic/martensitic steel EUROFER97 are developed. The reinforcing particles dispersed in the matrix of EUROFER97 are made of yttria and yttrium titanium oxides. Microstructure is investigated by transmiss ...
High-resolution x-ray absorption measurements reveal a rare-earth-dependent splitting of the Ni K edge in the insulating, charge-disproportionated state of the whole RNiO3 perovskite family. The splitting is five times larger for LuNiO3 [2.5(1) eV] than fo ...
A comparative characterization of the structure of normal and abnormal (osteoporotic) human lumbar and thoracic vertebrae samples was carried out to reveal the type of possible disorder. Samples from the bone fragments extracted during the surgery due to v ...
The motivation of this study is the need for fundamental understanding of the effects of processing conditions on the electrical properties of low- temperature co-fired ceramic (LTCC) tapes, those screen printed with commercial thick-film pastes of electro ...