The Effect of Yttrium Addition on the Microstructures and Electrical Properties of CuMn Alloy Thin Films
Publications associées (38)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Because of their outstanding mechanical and chemical properties, transition metal nitrides are widely accepted materials in the protective coatings industry. This work aims at elucidating the origin of their exceptional properties. The study concentrates o ...
Oxide dispersion strengthened steels based on the ferritic/martensitic steel EUROFER97 are developed. The reinforcing particles dispersed in the matrix of EUROFER97 are made of yttria and yttrium titanium oxides. Microstructure is investigated by transmiss ...
The motivation of this study is the need for fundamental understanding of the effects of processing conditions on the electrical properties of low- temperature co-fired ceramic (LTCC) tapes, those screen printed with commercial thick-film pastes of electro ...
Investigation of the microstructure, properties and biocompatibility of the Ti-6Al-4V alloy nitrided under glow discharge was performed. The microstructural analyses were carried out using light microscopy, X-ray diffraction, analytical scanning and transm ...
High-resolution x-ray absorption measurements reveal a rare-earth-dependent splitting of the Ni K edge in the insulating, charge-disproportionated state of the whole RNiO3 perovskite family. The splitting is five times larger for LuNiO3 [2.5(1) eV] than fo ...
Syntheses of ZSM-5 coatings on stainless steel plates were carried out via the substrate heating method. The reaction mixture was kept at temperatures below 100 °C, while the metal plates were heated to temperatures above 100 °C. It was demonstrated that c ...
This work presents the preliminary results on application of mineral sacrificial layer that is prepared to structure LTCC (low temperature co-fired ceramic). The proposed method suggests utilization of a sacrificial paste, which remains "permanent" during ...
Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used to study the porous and non-porous alpha-tricalcium phosphate (alpha-Ca-3(PO4)(2), alpha-TCP) prepared through a sintering procedure at 1200-1400 degrees C of beta-tricalcium phos ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
A comparative characterization of the structure of normal and abnormal (osteoporotic) human lumbar and thoracic vertebrae samples was carried out to reveal the type of possible disorder. Samples from the bone fragments extracted during the surgery due to v ...