Quench Simulation of REBCO Cable-in-Conduit Conductor With Twisted Stacked-Tape Cable
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The Superconducting Fault Current Limiter (SFCL) appears to be a device of great interest to efficiently build the electrical grid of tomorrow. With the recent progress made by the superconducting wires manufacturers, there are needs coming from the indust ...
In recent years many large scale demonstrators and prototypes of superconducting fault current limiters have been successfully developed and tested. Within the European Project ECCOFLOW (www.eccoflow.org), it is the first time that a resistive-type superco ...
Recent International Thermonuclear Experimental Reactor (ITER) Model Coils and tests on Nb-3 So Cable in Conduit Conductors (CICC) showed a significant and unexpected increase in the broadness of the transition to the normal state, resulting in degradation ...
A fundamental understanding of the quench phenomenon is crucial in the future design and operation of HTS based Fault Current Limiters (FCLs). The key parameter that quantifies the quenching process in superconductors is the normal zone propagation (NZP) v ...
The attention of the fusion magnet specialists has been drawn in the last years to the volt-ampere characteristic (VAC) of the large cable-in-conduit conductors (CICC), as early voltage was observed in conductor and model coil tests, far away from the expe ...
The index n of the voltage-current characteristic of large superconductors is a crucial parameter to assess the allowed range for coil operation. In the tests of the Insert coils at the CSMC as well as in the short sample test in the SULTAN facility, it is ...
For describing the E-J relation of high-Tc superconductors (HTS) in power applications, where the applied current I is generally limited by Ic, the critical state model, a piecewise linear generalization, or a simple power-law of the type E=Ec(J/Jc)^n are ...
In the frame of the European Fusion Technology Programme, the Forschungszentrum Karlsruhe and the CRPP Villigen have designed and built a 70 kA current lead for the ITER TF Coils using High Temperature Superconductors (HTS). At the beginning of 2004 the HT ...
The use of high temperature superconductor (HTS) materials in future fusion machines could increase the efficiency drastically, but strong boundary conditions exist. To outline the prospects, challenges and problems, first the benefit of using HTS material ...
Within the EFDA technology program, CRPP designed and prepared a short length of full size Nb3Sn developmental conductor to be tested in the SULTAN test facility. Nb3Sn strand with a higher specification and low Cu:non-Cu ratio was supplied by Outokumpu. H ...
