Controlling Single Molecule Conductance by a Locally Induced Chemical Reaction on Individual Thiophene Units

Klaus Kern, Hagen Klauk, Ivan Pentegov, Verena Katharina Schendel, Uta Schlickum, Peter Wahl
WILEY-V C H VERLAG GMBH, 2020
Journal paper

Abstract

Among the prerequisites for the progress of single-molecule-based electronic devices are a better understanding of the electronic properties at the individual molecular level and the development of methods to tune the charge transport through molecular junctions. Scanning tunneling microscopy (STM) is an ideal tool not only for the characterization, but also for the manipulation of single atoms and molecules on surfaces. The conductance through a single molecule can be measured by contacting the molecule with atomic precision and forming a molecular bridge between the metallic STM tip electrode and the metallic surface electrode. The parameters affecting the conductance are mainly related to their electronic structure and to the coupling to the metallic electrodes. Here, the experimental and theoretical analyses are focused on single tetracenothiophene molecules and demonstrate that an in situ-induced direct desulfurization reaction of the thiophene moiety strongly improves the molecular anchoring by forming covalent bonds between molecular carbon and copper surface atoms. This bond formation leads to an increase of the conductance by about 50 % compared to the initial state.

Official source

https://infoscience.epfl.ch/record/276031?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Bonding and Charge Transfer in Metal-Organic Coordination Networks on Au(111) with Strong Acceptor Molecules

Nan Jiang, Klaus Kern, Alexander Langner, Sebastian Stepanow

The geometric and electronic structure of two structurally similar metal organic networks grown on the Au(111) surface is investigated by scanning tunnelling microscopy (STM) and spectroscopy (STS) combined with density functional theory (DFT) calculations. The networks are composed of (i) F4TCNQ (C12F4N4, 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquino-dimethane) molecules and Au adatoms segregated from the pristine metal surface, and (ii) TCNQ (C12H4N4, 7,7,8,8-tetracyanoquinodimethane) and codeposited Mn atoms. In both cases, the strong electron acceptor character of the molecules results in metal to-ligand charge transfer to the lowest unoccupied molecular orbital (LUMO). The amount of electrons donated from the 4-fold coordinated Mn atoms to TCNQ is higher compared to the 2-fold coordinated Au adatoms to F4TCNQ This behavior is reflected in the appearance of distinct spectral features in STS data in the energy region close to the Fermi level resulting from the intricate interplay between surface states, adatom states, and molecular orbitals. These observations are consistent with a picture in which the LUMO of the TCNQ acceptor molecule hybridizes with Mn and Au substrate metal states becoming practically filled, while the LUMO of F4TCNQ is only partially filled despite being the stronger electron acceptor. Our results reveal the importance of the type of bonding between the strong acceptor and the metal center (Au or Mn) as well as its coordination in the determination of the charge transfer to the adlayer, which is important for its electronic properties.

Amer Chemical Soc2012

Growth and characterization of specific self-assembled supramolecular architectures at crystal surfaces

Marta Canas Ventura

In the framework of this thesis self-assembled supramolecular architectures of several molecular species on crystal metal surfaces are characterized. These investigations combine results obtained by means of scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS), X-Ray Photoelectron Spectroscopy (XPS), and Near-Edge X-Ray Absorption Fine Structure Spectroscopy (NEXAFS). The interest in controlling the formation of specific arrangements of supramolecular ensembles at surfaces is motivated to a great extent by the prospect to design molecular devices and nanomaterials with customized properties. The goal is a "spontaneous" creation of targeted, well-ordered molecular architectures, which shall be achieved by taking advantage of the molecule's propensity to self-assemble. Control means, in this context, predictability. This term address the accuracy of the prediction of the structures resulting from molecular self-assembly for systems exhibiting different characteristics. Here, system stands for a particular combination of a single-crystal surface and adsorbed molecular species. In a first part, the focus is given to the impact of a Pd(111) surface exhibiting high chemical activity. Due to surface induced deprotonation two resulting chemical states are found for the adsorbed terephthalic acid species. Deprotonation of the carboxyl moieties is observed to affect the topology of the molecular assemblies even though hydrogen bonds (H-bonds) are responsible for the stabilization of assemblies of both, intact and deprotonated molecular species. Therefore, the selective fabrication of a single specific molecular structure becomes a challenge when the surface is prone to induce chemical reactions. Secondly, a molecular species exhibiting conformational flexibility is studied on a largely inert Au(111) surface. It is observed that the characteristic conformational flexibility is also active on the surface, and the molecule is found to adopt different conformations depending on the locally most favorable bonding motif. In particular, phenyl groups may undergo a rotation such that one-dimensional chains can be stabilized by means of intermolecular H-bonds. This phenomenon is very interesting from an adsorbate-substrate interaction point of view, but it limits the predictability of supramolecular structures formed upon self-assembly. In a third step, a comparative study of the self-assembly of three closely related molecular species highlights the impact of concurrent competing intermolecular interactions. Molecules exhibiting an increasing number of possible interaction channels are found to assemble into an increasing number of distinct supramolecular architectures. The most flexible molecular species allowing for different hydrogen-bonding patterns as well as dipolar coupling self-assembles into various structurally complex architectures. Structural predictability, however, is low since the formation of one or the other assembly appears to depend on small variations in sample preparation conditions and on poorly controllable local surface properties. Finally, a system where the resulting structures fully agree with predictions evidences the possibility to control the formation of targeted specific supramolecular architectures. The formation of well ordered bimolecular ribbons and wires over extended length scales is accomplished by the rational choice of both, complementary building blocks for the selective formation of three-fold H-bonds and a nanostructured surface to guide the molecular self-assembly. Furthermore, the impact of H-bond formation on the electronic structure of self-assembled molecular building blocks is probed by STS measurements. The experimental data reveal shifts in the electronic levels depending on the H-bond configuration and on the local characteristics of the underlying surface. In order to improve the precision of such a study, single molecules, homo- and heteromolecular dimers as well as trimers are successfully isolated and assembled by molecular manipulation with the STM tip. Further STS studies on such artificially assembled structures are suggested.

EPFL2008

This thesis presents the first experimental results of a scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) investigation of rubrene at the supramolecular, molecular and submolecular level. Based on its semiconducting and fluorescent properties, this molecule is of particular interest in view of the emerging fields of molecular electronics and optoelectronics which could one day replace the conventional technology relying on semiconductors such as silicon and gallium arsenide. The goal is the substitution of these inorganic materials by cheap and flexible layers of semiconducting organic molecules for a new class of diodes and transistors, as well as the realization of electronic switches based on individual molecules. One fundamental approach is to take advantage of the molecular self-assembly behavior which results in the creation of well-ordered supramolecular structures. The investigations of the self-assembly of rubrene adsorbed on metal surfaces (Au(111), Au(100), Ag(111), and Ag(100)), which were carried out within the framework of this thesis, show a surprising diversity of supramolecular structures. Amongst other shapes, the molecules organize themselves into geometries of perfect hexagonal and pentagonal symmetry and create multifaceted patterns on the surface. A fascinating peculiarity consists in the spontaneous construction of nested structures which are built up by a hierarchical self-assembly of individual molecules into pentagonal supermolecules which form in a second step perfect supramolecular decagons. The geometric shape of rubrene is characterized by a structural asymmetry leading to the existence of two mirror imaged versions of the molecule which are not superimposable to each other, such as for instance our left and right hand or the helical DNA. The aspect of chirality is crucial for basic processes in living systems and calls for a fundamental understanding of the interaction mechanisms occurring between chiral molecules. The experiments on rubrene reveal that the intermolecular bonding differentiates between the two chiral types of the molecule (chiral recognition), yielding the self-organization into homochiral structures. These assemblies exhibit a geometry which is again chiral, demonstrating a propagation of chirality throughout the three stages of the supramolecular hierarchy. The semiconducting behavior of rubrene is furthermore probed by STS measurements detecting the energetic positions of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). The experimental data uncover that different adsorption conformations exhibit characteristic HOMO energies and reveal adsorption conformations of rubrene which preserve the intrinsic electronic structure of the free molecule. Furthermore, a switching of the molecular conformation and the electronic structure of one rubrene conformer is induced with the STM.

EPFL2006

Growth and characterization of specific self-assembled supramolecular architectures at crystal surfaces

Marta Canas Ventura

EPFL2008