Dynamical Coulomb Blockade as a Local Probe for Quantum Transport

Markus Etzkorn, Klaus Kern, Jacob Senkpiel
2020
Journal paper

Abstract

Quantum fluctuations are imprinted with valuable information about transport processes. Experimental access to this information is possible, but challenging. We introduce the dynamical Coulomb blockade (DCB) as a local probe for fluctuations in a scanning tunneling microscope (STM) and show that it provides information about the conduction channels. In agreement with theoretical predictions, we find that the DCB disappears in a single-channel junction with increasing transmission following the Fano factor, analogous to what happens with shot noise. Furthermore we demonstrate local differences in the DCB expected from changes in the conduction channel configuration. Our experimental results are complemented by ab initio transport calculations that elucidate the microscopic nature of the conduction channels in our atomic-scale contacts. We conclude that probing the DCB by STM provides a technique complementary to shot noise measurements for locally resolving quantum transport characteristics.

Official source

https://infoscience.epfl.ch/record/277278?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

The aim of the present thesis is to investigate several aspects of: the proteins mechanics, interprotein interactions and to study also new techniques, theoretical and technical, to obtain and analyze the force spectroscopy experiments. The first section is dedicated to the statistical properties of the unfolding forces in a chain of homomeric multimodular proteins. The basic idea of this kind of statistic is to divide the peaks observed in a force extension curve in separate groups and then analyze these groups considering their position in the force curves. In fact in a multimodular homomeric protein the unfolding force is related to the number of not yet unfolded modules (we call it "N"). Such effect yields to a linear dependence of the most probable unfolding force of a peak on ln(N). We demonstrate how such dependence can be used to extract the kinetic parameters and how, ignoring it, could lead to significant errors. Following this topic we continue with non kinetic methods that, using the resampling from the rupture forces of any peak, could reconstruct the rupture forces for all the other peaks in a chain. Then a discussion about the Monte Carlo simulation for protein pulling is present. In fact a theoretical framework for such methodology has to be introduced to understand the various simulations done. In this chapter we also introduce a methodology to study the ligand receptor interactions when we directly functionalize the AFM tip and the substrate. In fact, in many of our experiments, we see a "cloud of points" in the force vs loading rate graph. We have modeled a system composed by "N" parallel springs, and studying the distribution of forces obtained in the force vs loading rate graph we have establish a procedure to restore the kinetic parameters used. Such procedure has then been used to discuss real experiments similar to biotin-avidin interaction. In the following chapter we discuss a first order approximation of the Bell-Evans model where a more explicit form of the potential is considered. In particular the dependence of the curvature of the potential on the applied force at the minimum and at the metastable state is considered. In the well known Bell-Evans model the prefactors of the transition rate are fixed at any force, however this is not what happen in nature, where the prefactors (that are the second local derivative of the interacting energy with respect to the reaction coordinate in its minimum and maximum) depend on the force applied. The results obtained with the force spectroscopy of the Laminin-binding-protein are discussed, in particular this protein showed a phase transition when the pH was changed. The behavior of this protein changes, from a normal WLC behavior to a plateau behavior. The analysis of the force spectroscopy curves shows a distribution of length where the maximum of the first prominent peak correspond to the full length of the protein. However, length that could be associated with dimers and trymers are also present in this distribution. Later a new approach to study the lock and key mechanism, using "handles" with a specific force extension pattern, is introduced. In particular handles of (I27)3 and (I27–SNase)3 were biochemically attached to: strept-actin molecules, biotin molecules, RNase and Angiogenin. The main idea is to have a system composed by "handle-(molecule A)-(molecule B)-handle" where the handles are covalently attached to the respective molecules and the two molecules "A and B" are attached by secondary bonds. This approach allows a better recognition of the protein-protein interaction enabling us to filter out spurious events. Doing a statistic on the rupture forces and comparing this with the statistic of the detachments of the system of the bare handles, we are able to extract the information of the interaction between the molecule A and B. The two last chapters are of more preliminary character that the previous part of the thesis. A section is dedicated to the estimation of effective mass and viscous drag of the cantilevers studied by autocorrelation and noise power spectrum. Usually the noise power spectrum method is the most used, however the autocorrelation should give approximately the same information. The parameters obtained are important in high frequency modulation techniques. In fact, they are needed to interpret the results. The results of these two methods show a good agreement in the estimation of the mass and the viscous drag of the various cantilever used. Afterwards a chapter is dedicated to the discussion of the force spectroscopy experiments using a low frequency modulation of the cantilever base. Such experiments allow us to record the phase and the amplitude shift of the modulation signal used. Using the amplitude channel we managed to restore the static force signal with a lower level of noise. Moreover these signals give us direct information about the dynamic stiffness and the lose of energy in the system, information that, using the standard technique would be difficult (or even impossible) to obtain.

EPFL2012

This thesis presents a combined experimental and theoretical study of the classical and quantum magnetization dynamics in single magnetic adatoms and molecules, and on the classical and quantum coherent control thereof. First, a detailed description of the methods and in particular electron spin resonance scanning tunneling spectroscopy is given. Next, we give a detailed account of how to experimentally update a standard scanning tunneling microscope for such experiments, which ultimately lead us to set up the world's second microscope with such capabilities. Subsequently, we show how we iteratively improved the setup, and how we were able to achieve a transmission of radiofrequency voltages to the tunneling junction with almost no additional losses beyond the intrinsic limitations of the materials used, a great improvement compared to most setups presently in use.Afterwards, we apply this technique to the metal-organic complex iron phthalocyanine. On MgO, we find it to form a spin-1/2 system, and we demonstrate quantum coherent control thereof, and investigate the magnetic interaction between surface-adsorbed molecules. Furthermore, we use this technique to experimentally demonstrate the magnetic stability of Dy adatoms on MgO. We find that this system, by several metrics, represents the worlds most stable single atom magnet discovered thus far. Using the capability of scanning tunneling microscopes to perform atomic manipulation, we ensemble atomically precise Dy nanostructures. By classically controlling the magnetic orientation of the Dy atoms, we are thus able to store information long-term in single adatoms and nanostructures even in absence of an external field, and create nanomagnets and local magnetic fields with unprecedented precision and stability.Finally, we investigate the magnetic properties of Ho/MgO. Depending on the precise adsorption site and charge configuration, we find either long lifetimes in the case of top-site 4f10 Ho, which was recently discovered as world's first single atom magnet, or fast sub-barrier relaxation due to strongly mixed quantum states. Using a novel theoretical approach, we are able to disentangle the different contributions of the individual species measured in ensemble-averaging X-ray absorption studies, and lift the discrepancies between previous X-ray and scanning tunneling microscopy based studies on Ho/MgO. By theoretically describing the perturbing effects of the experimental probes driving the spin degree of freedom out of thermal equilibrium, we are able to explain the measured dynamics in good agreement with the experimental data.

EPFL2021

Scanning near-field infrared microscopy and spectromicroscopy applied to nano-systems and cells

Dusan Vobornik

This thesis further explores the possibilities of scanning near-field optical microscopy (SNOM) in both materials and life sciences. Two experimental SNOM setups were developed: one designed for infrared spectroscopy applications and the other for the imaging of fluorescently labeled samples. The results of the experiments that were conducted with both setups are presented and analyzed in this thesis. Diffraction limits the resolution of lens-based microscopes to a value close to that of the wavelength of the light that is used to illuminate the samples. SNOM instruments overcome this limit by probing the near-field light — the light that remains within close vicinity of the sample and decays exponentially away from it. The SNOM concept and instrumental design are described. A comparison of SNOM with other novel microscopies (electron, atomic force, and scanning tunneling microscopies) outlines the main advantages of SNOM — the sole optical microscopy technique with a nanometer resolution. Aperture-based infrared SNOM (IR-SNOM), performed in the spectroscopic mode using the Vanderbilt University free electron laser, recently started delivering spatially resolved information on the distribution of chemical species and on other laterally fluctuating properties. The IR-SNOM combines the IR spectroscopy's chemical specificity and the SNOM's high optical and topographical resolutions. The IR-SNOM experimental setup is described in detail and results from the study of cells, boron nitride and lithium fluoride thin films are presented and analyzed. They demonstrate the great potential of this new technique. An overview of the development of IR-SNOM, as well as a consideration of its future possibilities are presented. The newly built SNOM instrument at EPFL was used for experiments that are complementary to the aforementioned IR-SNOM experiments. Specifically, the new SNOM enabled the study of fluorescently marked samples. Images of fluorescently labeled cells and carbon nanotubes are presented and analyzed. The results further demonstrate the exciting possibilities of SNOM.

EPFL2005

Scanning near-field infrared microscopy and spectromicroscopy applied to nano-systems and cells

Dusan Vobornik

EPFL2005

EPFL2021

EPFL2012