Solidification of Metallic Alloys: Does the Structure of the Liquid Matter?
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We use in situ observations by variable temperature transmission electron microscopy on Ga drops at the tips of GaAs nanowires to investigate the phase behavior of nanoscale Ga. Experiments on pure Ga drops are compared with drops containing well-defined l ...
This work is motivated by an industrial interest in gaining a better understanding of the phase transformations that govern the mechanical properties of 18-carat gold alloys commonly used in jewelry applications and luxury watchmaking. These alloys fall in ...
Porosity is one of the major defects in castings because it reduces the mechanical properties of a cast piece [1]. Porosity formation results from the effect of two concomitant mechanisms, namely solidification shrinkage and segregation/precipitation of ga ...
The Haasen plot (inverse activation area 1/Delta alpha vs. offset flow stress sigma-sigma(s)) for solute-strengthened alloys is usually assumed additive, 1/Delta alpha = 1/Delta alpha(s) + 1/Delta alpha(f), with 1/Delta alpha(f) similar to beta(sigma-sigma ...
Aluminum zinc alloys constitute an important class of wrought alloys, the so-called 7000 series, and are also widely used as anti-corrosion coatings of steel sheets. They are also interesting from a more fundamental point of view because zinc, a hexagonal ...
The anisotropy of the solid-liquid interfacial energy, gamma(sl), plays a key role in the accurate prediction of growth morphologies in metallic alloys. This interfacial energy anisotropy can vary duo to alloy composition, especially when that of the pure ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
The Cu-Ge binary system was assessed thermodynamically using the CALPHAD method through Thermocalc (R) software package based on the evaluation of all available experimental data from the published literature. The solution phases, including liquid, fcc, hc ...
A phase-field model for the solid-solid alpha -> gamma transition of Ti-Al binary alloys is presented based on analytical Gibbs free energies and couplings to the thermodynamical database ThermoCalc. The equilibrium values recover the alpha + gamma phase b ...
Hot tearing, a severe defect occurring during solidification is the conjunction of tensile stresses which are transmitted to the mushy zone by the coherent solid underneath and of insufficient liquid feeding to compensate for the volumetric change. The RDG ...
Th. Böllinghaus, H. Herold, C. E. Cross and J.C Lippold2008
PLLA crystallization rates increase with nHA content owing to increased nucleation, which compensates a decrease in spherulite growth rate, G, at 100 to 130 °C, and to suppression of the twin peak in G(T) seen in pure PLLA, linked to a transition from the ...
