Publication

Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin

Related publications (34)

Multimaterial Volumetric Printing of Silica-Based Glasses

Christophe Moser, Paul Delrot, Jorge Andres Madrid Wolff, Damien Claude-Marie Loterie, Antoine Vincent Boniface, Roberto Arturo Emma

Silicate glasses have played a major role as structural and functional materials in human civilization since ancient Egypt. Despite their widespread use and importance in modern society, silica glasses with complex geometries are only fabricated in automat ...
Hoboken2024

Deep learning accelerated prediction of the permeability of fibrous microstructures

Véronique Michaud, Baris Çaglar, Guillaume Clément Broggi

Permeability of fibrous microstructures is a key material property for predicting the mold fill times and resin flow path during composite manufacturing. In this work, we report an efficient approach to predict the permeability of 3D microstructures from d ...
2022

Compact laser-assisted tools for high-resolution additive manufacturing

Paul Delrot

Micro-additive manufacturing has become an enabling technology in biomedical research as it allows for instance creating functional microstructures or studying cellular interactions at the microscale. Among the various manufacturing techniques laser-actuat ...
EPFL2018

STEP-NC digital thread for additive manufacturing: data model, implementation and validation

Ian Anthony Stroud, Pascal Mognol

Substantial progress and development in additive manufacturing (AM) technologies have been realised during the last decade but have hardly been implemented on AM systems due to old numerical solutions still used by the AM digital thread, for instance STL ( ...
TAYLOR & FRANCIS LTD2018

3D Printing of Polymers with Hierarchical Continuous Porosity

Dominique Pioletti, Pierre-Etienne Bourban, Matteo Gregorio Modesto Marascio, Jens Antons

Cellular thermoplastic structures with multiscale porosity (1–300 µm microporosity to 0.3–10 mm macroporosity) are produced from an integrated approach of 3D printing by Fused Deposition Modeling printing and Supercritical CO2 Foaming. Porous strands and r ...
2017

Hybrid Processing of Thermoplastic Based Multimaterials

Rajasundar Chandran

There is a growing interest in exploring novel material combinations and processing technology to manufacture complex 3D shaped polymer and composite structures. In the field of prosthetics and orthotics, this need is significant with additional challenges ...
EPFL2017

Spider silk thread as a fiber optic chemical sensor

Luc Thévenaz, Kenny Hey Tow, Desmond Chow Ming Chia

Monitoring the properties of light transmitted through a thread of spider silk enables detection of trace amounts of chemical compounds. ...
2016

Surface 3D Micro Free Forms: Multifunctional Microstructured Mesoporous alpha-Alumina by in Situ Slip Casting Using Excimer Laser Ablated Polycarbonate Molds

Paul Bowen, Patrik Willi Hoffmann, Sriharitha Rowthu

Ceramic surface microstructuring is a rapidly growing field with a variety of applications in tribology, wetting, biology, and so on. However, there are limitations to large-area microstructuring and fabrication of three-dimensional (3D) micro free forms. ...
Amer Chemical Soc2015

Dynamic indentation induced damage in silicon nitride

Jean-François Molinari, Seyedeh Mohadeseh Taheri Mousavi

This poster shows simulation results of trasngranular fracture percentage in the ceramic microstructure under tensile loading. Moreover, the crack face roughness was investigated for microstructures with different grain sizes. ...
2014

Segregation of anion (Cl−) impurities at transparent polycrystalline α-alumina interfaces

Paul Bowen, Cécile Hébert, Marco Cantoni, Farhang Nabiei, Abhishek Tewari

Small amounts of anion impurities (e.g. Cl), which are incorporated during the synthesis of ceramic powders, can affect the properties and microstructure of the final sintered ceramic. The effect of anion impurities is a little studied and poorly understoo ...
Elsevier Sci Ltd2014

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.