Publication

Computational parametric analysis of the design of cross-flow turbines under constraints

Related publications (46)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Enhancing Wind Farm Performance through Axial Induction and Tilt Control: Insights from Wind Tunnel Experiments

Fernando Porté Agel, Guillem Armengol Barcos

Static axial induction control and tilt control are two strategies that have the potential to increase power production in wind farms, mitigating wake effects and increasing the available power for downstream turbines. In this study, wind tunnel experiment ...

Basel2024

Wind farm power density optimization according to the area size using a novel self-adaptive genetic algorithm

Fernando Porté Agel, Nicolas Otto Kirchner Bossi

This work studies the power density (PD) optimization in wind farms, and its sensitivity to the available area size. A novel genetic algorithm (PDGA) is introduced, which optimizes PD and the turbine layout, by self-adapting to the PD and to the solutions ...

Oxford2023

Discretization Uncertainties of Flow and Fatigue Damage Simulations of a Reversible Francis Pump-Turbine at Off-Design Operation in Turbine Mode

Drazen Dujic, Daniel Biner, Philippe Alexandre Bontemps

In the framework of the XFLEX HYDRO H2020 European Project, a 5 MW reversible Francis pump-turbine prototype, equipped with an industrial full size frequency converter, is investigated to demonstrate enhanced grid regulation capacities of variable speed hy ...

SPRINGER INTERNATIONAL PUBLISHING AG2022

The hydropower sector has recently raised the interest in pump as turbine (PaT) that can be a valid trade-off between capital cost and performance in micro-scale installations. Nevertheless, the modest efficiency of PaTs often restricts their exploitation. ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Application of particle-based numerical analysis to the practical design of Pelton turbine

François Avellan, Siamak Alimirzazadeh, Takashi Kumashiro

For the design optimization of the Pelton turbine, it is highly demanded to investigate the flow inside the turbine casing, which includes the water jet from the nozzles, the interaction between the jet and rotating runner, and the flow ejected from the bu ...

IOP PUBLISHING LTD2021

This paper proposes a novel approach to predict the machining time of small-scale radial-inflow turbine impellers for organic Rankine cycle power systems based on preliminary design parameters. The time prediction method uses machining databases of differe ...

Technical University of Munich2021

, ,

The paper presents a model-based control strategy for optimal asset management of hydroelectric units in run-of-river hydropower plants. The proposed control strategy aims to operate the unit at the best efficiency while improving water flow management and ...

2021

Theoretical and Experimental Investigation of a 34 Watt Radial-Inflow Steam Turbine with Partial-Admission

Jan Van Herle, Jürg Alexander Schiffmann, Patrick Hubert Wagner

A micro steam turbine with a tip diameter of 15 mm was designed and experimentally characterized. At the nominal mass flow rate and total-to-total pressure ratio of 2.3 kg/h and 2, respectively, the turbine yields a power of 34 W and a total-to-static isen ...

2020

, , , , , ,

The Pelton turbine is an impulse turbine typically installed for high head hydroelectric power plants. For a site with a rated head H and discharge Q, a higher specific speed turbine results in a more compact generating unit with reduced manufacturing cost ...

2020

, ,

Pumps running as turbines are suitable hydraulic machines for micro hydropower applications. The selection of the proper pumps to install in a given site still remains a major challenge, as pump manufacturers do not provide the characteristic curves data i ...

2019