Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The deformation-induced martensitic transformation observed in specific materials can enhance their mechanical properties or result in functional properties. For example, the transformation induced plasticity (TRIP) effect results in a good combination of ...
Oxide inclusions are ubiquitous in steel and are known to affect, generally in a negative sense, the mechanical performance of steel products. Micromechanical properties of those phases are therefore important, yet they have remained largely unexplored. We ...
The martensitic phase transformation in steel is one of the most famous solid state transformation because of its contribution in the development of the modern industry. This transformation from a face-centered cubic (FCC) high temperature phase, called th ...
The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...
EPFL2018
The mechanical behaviour of metallic materials that have a microstructure composed of a brittle phase embedded in a ductile matrix is dictated by a complex interplay of factors such as local phase properties, cohesive properties, geometrical characteristic ...
EPFL2017
Extreme loading scenarios such as earthquakes, exceptional wind gusts or tides are characterized by very high amplitude and multidirectional cyclic loads applied to a structure. Ultra Low Cycle Fatigue (ULCF) arises in such cases and can be summarily defin ...
The austenite/martensite (fcc/bcc) interface is prevalent across many new classes of high-strength steels, and yet both its fundamental structure and its mechanism of motion remain uncertain in spite of decades of research. Here, atomistic simulations are ...
A multi-phase Ti-6Al-4V prepared by electron beam melting and thermal post treatments has been shown to exhibit increased strength and ductility over standard wrought or hot isostatic pressed Ti-6-Al-4V. The mechanical improvements are due to a prolonged, ...
The Naturally Buckling Brace (NBB) is a steel brace developed by the writers, which consists of a high-strength and low-yielding steel channel arranged in parallel with an intentional eccentricity along the brace length. The NBB deforms with a novel mechan ...
International Association of Earthquake Engineering2017
H-SA700 is a type of new ultra-high-strength structural steel that is more environmentally friendly and more suitable for mass production than conventional high-strength steel. The objective of this paper is to contribute to the practical application of CF ...
International Association of Earthquake Engineering2017
