Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
High dry friction requires intimate contact between two surfaces and is generally obtained using soft materials with an elastic modulus less than 10 MPa. We demonstrate that high-friction properties similar to rubberlike materials can also be obtained usin ...
We study by means of ab initio calculations the ideal tensile and shear strengths of the C-46 clathrate phase. While its bulk modulus and elastic constants are smaller than in diamond, its strength is found to be in all directions larger than the critical ...
Bonded particle modelling (BPM) is nowadays being extensively used for simulating brittle material failure. In BPM, material is modelled as a dense assemblage of particles (grains) connected together by contacts (cement). This sort of modelling seriously d ...
Formulating effective coatings for use in nano- and biotechnology poses considerable technical challenges(1). If they are to provide abrasion resistance, coatings must be hard and adhere well to the underlying substrate(2). High hardness, however, comes at ...
Dense tubular self-supporting La0.7Ca0.3Fe0.85 Co0.15O3-δperovskite membranes were prepared by thermoplastic extrusion. The rheological behavior of the ceramic mixture was studied. Non-deformed tubes o ...
The effect of different curing temperatures (from 20 to 40 °C) on the compressive strength and hydration of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) have been investigated between 3 and 28 days, using the loss on ignition test (LOI) and th ...
Thick-film materials are very advantageous for piezoresistive pressure and force sensors because of ease of processing, reliability and low cost. The standard substrate material used with thick-film technology for sensing is alumina, but its elastic modulu ...
This paper is an experimental and numerical investigation of desiccation and the associated cracking. First an elastic formulation of the hydro-mechanical problem is presented, based on an analogy that can be drawn with thermo-elasticity. Then, the results ...
Uniaxial quasi-static tensile testing on individual nanocrystalline Co nanowires (NWs), synthesized by electrochemical deposition process (EDP) in porous templates, was performed inside a scanning electron microscope (SEM) using a microfabricated tensile s ...