Anion Selection Criteria for Water-in-Salt Electrolytes
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The surface tension of electrolyte solutions exhibits a minimum at millimolar electrolyte concentrations and then rises with increasing concentration. This minimum, known as the Jones-Ray effect, has been hotly debated over the past 80 years. If not consid ...
The electrical conductivities of complex hydrides Li2(BH 4)(NH2) and Li4(BH4)(NH 2)3 consisting of (BH4)- and (NH2)- anions are investigated focusing on their low melting temperatures (365 K for Li2(BH4)(NH2) and 490K for Li4(BH4)(NH2)3). The two hydrides ...
As a promising cathode inheritor for lithium-ion batteries, the sulfur cathode exhibits very high theoretical volumetric capacity and energy density. In its practical applications, one has to solve the insulating properties of sulfur and the shuttle effect ...
There is considerable interest in developing solid electrolytes for rechargeable lithium batteries as they have the potential to increase both energy d. due to incorporation of a lithium metal anode and safety of batteries due to the fact that they are non ...
Replacing the liq. electrolyte in lithium batteries by a solid has been a long-standing goal of the battery industry due to the promise of better safety and the potential to produce batteries with higher energy densities. Recently, sym. polystyrene-block-p ...
The effect of TBP on Co(II/III) redox electrolyte was examined. Photocurrent of the device can be limited in electrolyte with high TBP concentration due to its viscous nature. The higher amount of TBP in electrolyte increases the viscosity of electrolyte a ...
Sodium bis(fluorosulfonyl)imide based aqueous electrolytes exhibit a wide electrochemical stability window of up to 2.6 V when the water-to-salt molar ratio falls below 2:1, enabling the fabrication of high-voltage rechargeable aqueous sodium-ion batteries ...
The anodic dissolution of 100Cr6 steel in neutral electrolytes containing sodium chloride and sodium nitrate was investigated potentiodynamically and galvanodynamically with a rotating disc electrode at room temperature. The total concentration of the mixe ...
The feasibility of spatially resolved Raman spectroscopy probing diffusion multiples as a high-throughput method to study phase transformations in Li-ion conductors is demonstrated. The method is applied to the pseudobinary LiBH 4-LiI system, which shows h ...
Functionalized pyrrolidinium compounds, 3-((2-hydroxyethylthio)methyl)-1,1,4-trimethylpyrrolidinium and 3-((2-carboxyethylthio)methyl)-1,1,4-trimethylpyrrolidinium chlorides, are prepared from N,N-diallyl-N,N-dimethylammonium chloride by radical thiol-ene ...
