Publication

On the effects of fluid pressure variations on rock-mass and fault mechanical behaviour

Abstract

In the past 20 years, the growing interest in deep geo-reservoirs for purposes such as carbon storage, waste water disposal, or geothermal energy exploitation have led to large-volume fluid injections into the upper continental crust. These fluid injections have caused a massive increase in the seismicity rate in some normally “quiet” regions. Recent observations suggested that different injection strategies could produce different mechanical responses in these reservoirs. In this vein, cyclic fluid injections have been proposed as an alternative to conventional monotonic injections to mitigate induced earthquakes. Additionally, recent studies have suggested that injection into deeper geo-reservoirs, at the brittle-ductile transition, could reduce (or suppress) induced earthquakes. In this context, this research has aimed at bettering our understanding of reservoir deformation during different fluid injection strategies. Laboratory experiments were performed on porous reservoir rock under different reservoir conditions and fluid injection strategies. In the first section, it is demonstrated that water-saturated conditions, compared to dry conditions, cause a reduction in uniaxial compression strength in five sandstones. Additional experiments suggest that this water weakening of sandstones is due to the reduction of the fracture toughness and of the static friction of the materials. In the second section, it is shown that under drained conditions, pore fluid pressure oscillations affect the long-term mechanical behaviour of intact porous rocks. More than the amplitude of the oscillations, the period controls the time-to-failure, failure strength and dilatancy rate of the sample. Additionally, the pore fluid pressure oscillations control the AE events (a proxy for the seismicity): the AE events rate oscillates in-phase with the pore fluid pressure variations. Increasing the differential stress, the amplitude and the period of the oscillations accentuates this behaviour. In the third section, it is demonstrated that under drained conditions, pore fluid pressure oscillations strongly affect the mechanical behaviour of faults. The pore fluid pressure signal directly controls the instabilities’ (i.e., stick-slip and AE events) distribution, with an increase of events at elevated pore fluid pressure. For initially stable sliding faults, the pore fluid pressure oscillation signal controls the onset of unstable slip: the higher the pore fluid pressure oscillation’s amplitude, the lower the stress and displacement at the onset of a seismic event. In the fourth section, it is shown that under quasi-drained conditions, a pore fluid pressure increase within a rock undergoing ductile deformation causes instantaneous dilation of the system. Further increasing the pore fluid pressure leads to the development of localized deformations and the shear fracturing of the rock. The macroscopic shear fracturing is not instantaneous when the ductile to brittle transition is passed. Prior to this, a creeping phase is necessary. The time and strain length of this creeping phase are controlled by the rate of pore fluid pressure increase: the faster the injection, the longer the creeping phase. This work provides new insight into the mechanical behaviour of rock masses and faults under various crustal conditions during pore fluid pressure variations. It helps to constrain the mechanisms involved in deep geo-reservoirs submitted to different injection strategies.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (43)
Induced seismicity
Induced seismicity is typically earthquakes and tremors that are caused by human activity that alters the stresses and strains on Earth's crust. Most induced seismicity is of a low magnitude. A few sites regularly have larger quakes, such as The Geysers geothermal plant in California which averaged two M4 events and 15 M3 events every year from 2004 to 2009. The Human-Induced Earthquake Database (HiQuake) documents all reported cases of induced seismicity proposed on scientific grounds and is the most complete compilation of its kind.
Earthquake
An earthquake (also known as a quake, tremor or temblor) is the shaking of the surface of the Earth resulting from a sudden release of energy in the Earth's lithosphere that creates seismic waves. Earthquakes can range in intensity, from those that are so weak that they cannot be felt, to those violent enough to propel objects and people into the air, damage critical infrastructure, and wreak destruction across entire cities. The seismic activity of an area is the frequency, type, and size of earthquakes experienced over a particular time.
Strength of materials
The field of strength of materials (also called mechanics of materials) typically refers to various methods of calculating the stresses and strains in structural members, such as beams, columns, and shafts. The methods employed to predict the response of a structure under loading and its susceptibility to various failure modes takes into account the properties of the materials such as its yield strength, ultimate strength, Young's modulus, and Poisson's ratio.
Show more
Related publications (151)

Water weakening and the compressive brittle strength of carbonates: Influence of fracture toughness and static friction

Marie Estelle Solange Violay, Barnaby Padraig Fryer, Corentin Jean-Marie Rémi Noël

Water is ubiquitous within the pore space of rocks and has been shown to affect their physical and mechanical behaviour. Indeed, water can act on the rock strength via mechanical (i.e., reducing the effective stresses) or chemical effects (e.g., mineral di ...
2024

Frictional weakening leads to unconventional singularities during dynamic rupture propagation

Marie Estelle Solange Violay, Mathias Alexandre David Lebihain, François Xavier Thibault Passelègue, Federica Paglialunga

Earthquakes i.e. frictional ruptures, are commonly described by singular solutions of shear crack motions. These solutions assume a square root singularity order around the rupture tip and a constant shear stress value behind it, implying scale-independent ...
2024

Bounding the localized to ductile transition in porous rocks: implications for geo-reservoirs

Marie Estelle Solange Violay, Gabriel Gérard Dominique Meyer

Porous rocks have long been the focus of intense research driven by their importance in our society as host to our most essential resources (oil, gas, water, geothermal energy, etc), yet their rheology remains poorly understood. With increasing depth, poro ...
2023
Show more
Related MOOCs (16)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
The Art of Structures I - Cables and arcs
Ce cours présente les principes du fonctionnement, du dimensionnement et de la conception des structures. L'approche est basée sur une utilisation de la statique graphique et traite en particulier des
The Art of Structures I - Cables and arcs
L'art des structures propose une découverte du fonctionnement des structures porteuses, telles que les bâtiments, les toitures ou les ponts. Ce cours présente les principes du dimensionnement et les s
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.