The influence of the kinematics of rough surface engagement on the transfer of forces in cracked concrete
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A new martensitic ODS alloy (nominal composition Fe-9Cr-1W-0.2Ti-0.3Y 2O3) has recently been developed at CEA Saclay to achieve the goals defined for GEN IV reactors. The aim of this paper is to present the main challenges involved in the manufacturing of ...
Thin circular piezoelectric energy harvester diaphragms undergoing large deflection in a harsh liquid environment are investigated in this paper. A material set combining AlN as transducer, SiC as electronics, Mo as wiring and Si as holder is considered. A ...
Flat-slab column connections are susceptible to brittle failure, which lead to the necessity of improving ductility and ultimate strength. In case of edge connections, the behaviour at ultimate state is highly influenced by nonsymmetrical distribution of s ...
Rehabilitation of deteriorated concrete bridges is a heavy burden from the socio-economic viewpoint. Novel concepts for the rehabilitation of concrete structures must be developed. Ultra-High Performance Fibre Reinforced Concretes (UHPFRC) provide the stru ...
The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional ...
The spreading of deicing salt on roads during winter and the consequent migration of chloride ions within concrete exposes structures reinforcement to corrosion. Reinforcement corrosion is problematic because it reduces the structure's load carrying capaci ...
The results of tests on two continuous composite beams combining a reinforced concrete (RC) beam with a layer of reinforced ultra-high performance fiber reinforced concrete (R-UHPFRC) are presented. The R-UHPFRC element acts both as a tensile membrane and ...
In this paper, the strength of prestressed girders with low amount of shear reinforcement or with defective anchorage is investigated by means of a test programme carried out at the Ecole Polytechnique Fédérale de Lausanne on 10 prestressed and 2 reinforce ...
Proceedings of the 9th fib International PhD Symposium in Civil Engineering2012
We present a computational model, which combines interface debonding and frictional contact, in order to investigate the response of concrete specimens subjected to dynamic tensile and compressive loading. Concrete is modeled using a meso-mechanical approa ...
It is recognized that most damage to reinforced concrete structures is caused by insufficient durability rather than by low strength. In most cases, the quality and thickness of the cover concrete (‘‘covercrete’’) determine the service life of the structur ...
