Fabrication, Characterization, and Simulation of Glass Devices with AlN Thin-Film Transducers for Excitation of Ultrasound Resonances
Related publications (41)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The electrically detected magnetic resonance (EDMR) results presented in this thesis demonstrate
a spin dependence of the charge transfer between an electrode and an electrolyte. These results
were found using simultaneous detection of continuous wave elec ...
A moving mesh approach is employed to simulate two-phase flow with phase change. The mathematical model is based on the Arbitrary Lagrangian-Eulerian (ALE) description of the axisymmetric Navier-Stokes equations and energy conservation. These equations are ...
In this paper we develop and analyze a multilevel weighted reduced basis method for solving stochastic optimal control problems constrained by Stokes equations. We prove the analytic regularity of the optimal solution in the probability space under certain ...
Vibration mode and resonance frequency of piezoelectric MEMS ultrasonic sensors was investigated on buckled diaphragm structures. The buckling of the diaphragms was introduced intrinsically through residual stress control of the piezoelectric film, and ext ...
Solutions of the organic pollutant model, Crystal Violet (CV), were subjected to ultrasonic, electrochemical treatment and its combination. Ultrasound was tested at two frequencies (20 kHz or 800 kHz) and 80 W in deionized water. After 120 min, 20 kHz cond ...
Multiscale or multiphysics partial differential equations are used to model a wide range of physical systems with various applications, e.g. from material and natural science to problems in biology or engineering. When the ratio between the smallest scale ...
The nuclear magnetic resonance of paramagnetic solids is usually characterized by the presence of large chemical shifts and shift anisotropies due to hyperfine interactions. Frequently the resulting spectra cover a frequency range of several megahertz, whi ...
This paper deals with an approach to identify geometrical deviations of flexible parts from optical measurements. Each step of the approach defines a specific issue which we try to respond to. The problem of measurement uncertainties is solved using an ori ...
Anaerobic digestion of organic waste to methane gas (CH4) is an attractive method to produce renewable energy. Due to the trend towards the reuse of waste and away from fossil energy sources, this technology saw a worldwide development in the recent years. ...
A novel method for quantitative lateral force measurement (LFM) calibration has been developed. Using a single-molecule spectroscopy approach it is possible to calibrate the AFM levers for both lateral and normal spring constants with a single image scan. ...