Simulation and experimental validation of pulsating heat pipes
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Plate heat exchangers are adopted in many domestic and industrial applications, such as ventilation, air conditioning, evaporation or condensation process, heat pumps and cooling of hydrodynamic circuits in engines. In the present thesis, an extensive expe ...
In the second article of the present two-part paper, upward single-phase heat transfer within a compact plate heat exchanger was investigated experimentally. The experimental setup, the data reduction technique and pressure drop results were presented in P ...
An experimental study is presented to characterize two-phase thermal and hydraulic performance of a prototype corrugated plate heat exchanger with small pressing depth. In particular, upward flow boiling of low pressure refrigerant R245fa was investigated ...
Infrared (IR) thermography was used to measure the local heat transfer coefficients within two plate heat exchanger geometries. The chevron patterns were machined into polycarbonate and IR transparent calcium fluoride plates, both of which were electricall ...
Boiling heat transfer in microchannels has been investigated extensively in the last two decades. However, most results from independent experimental studies display a substantial disagreement on the influence of the flow conditions and mechanisms on the h ...
Multi-microchannel evaporators used for the cooling of high heat flux electronics have been of interest to both industry and academia for more than a decade. Such interest has sparked a large number of research studies on the flow boiling pressure drop and ...
An experimental study on flow boiling pressure drop and heat transfer of a new environmentally friendly refrigerant R1233zd(E), in a parallel multi-microchannel evaporator was carried out. The silicon microchannels evaporator was 10 mm long and 10 mm wide, ...
The Phase-1 upgrade of the LHC to full design luminosity, planned for 2019 at CERN, requires the modernisation of the experiments around the accelerator. The Inner Tracking System (ITS), the innermost detector at the ALICE experiment, will be upgraded by r ...
A transient thermal regime is achieved in glassy GeTe4 by first-principles molecular dynamics following the recently proposed ''approach-to-equilibrium'' methodology. The temporal and spatial evolution of the temperature do comply with the time-dependent s ...
New experimental flow boiling heat transfer results averaged along a very low thermal conductivity polyimide channel are presented. The experimental setup consists of a horizontal, 285 mm-long, 2.689 mm inner diameter polyimide tube, heated by a counter-cu ...