Simulation and experimental validation of pulsating heat pipes
Publications associées (177)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The Phase-1 upgrade of the LHC to full design luminosity, planned for 2019 at CERN, requires the modernisation of the experiments around the accelerator. The Inner Tracking System (ITS), the innermost detector at the ALICE experiment, will be upgraded by r ...
Plate heat exchangers are adopted in many domestic and industrial applications, such as ventilation, air conditioning, evaporation or condensation process, heat pumps and cooling of hydrodynamic circuits in engines. In the present thesis, an extensive expe ...
New experimental flow boiling heat transfer results averaged along a very low thermal conductivity polyimide channel are presented. The experimental setup consists of a horizontal, 285 mm-long, 2.689 mm inner diameter polyimide tube, heated by a counter-cu ...
In the second article of the present two-part paper, upward single-phase heat transfer within a compact plate heat exchanger was investigated experimentally. The experimental setup, the data reduction technique and pressure drop results were presented in P ...
Boiling heat transfer in microchannels has been investigated extensively in the last two decades. However, most results from independent experimental studies display a substantial disagreement on the influence of the flow conditions and mechanisms on the h ...
A transient thermal regime is achieved in glassy GeTe4 by first-principles molecular dynamics following the recently proposed ''approach-to-equilibrium'' methodology. The temporal and spatial evolution of the temperature do comply with the time-dependent s ...
An experimental study is presented to characterize two-phase thermal and hydraulic performance of a prototype corrugated plate heat exchanger with small pressing depth. In particular, upward flow boiling of low pressure refrigerant R245fa was investigated ...
Multi-microchannel evaporators used for the cooling of high heat flux electronics have been of interest to both industry and academia for more than a decade. Such interest has sparked a large number of research studies on the flow boiling pressure drop and ...
An experimental study on flow boiling pressure drop and heat transfer of a new environmentally friendly refrigerant R1233zd(E), in a parallel multi-microchannel evaporator was carried out. The silicon microchannels evaporator was 10 mm long and 10 mm wide, ...
Infrared (IR) thermography was used to measure the local heat transfer coefficients within two plate heat exchanger geometries. The chevron patterns were machined into polycarbonate and IR transparent calcium fluoride plates, both of which were electricall ...