Break-even Distance for MVDC Electricity Networks According to Power Loss Criteria
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In AC/DC power distributions networks, power converters are interfacing buses to ensure DC voltage regulation and power distribution. Active front ends are used between AC and DC buses and two typical control schemes that can be implemented are voltage reg ...
2023
Owing to the advancements in the area of power electronics, efficient and flexible ac to dc conversion is made possible, bringing back into focus the idea of the dc power transmission at various voltage levels. Several technical and economical factors advo ...
IGCTs have successfully demonstrated to be well-suited devices for an application in medium-voltage dc transformers based on LLC resonant converter topology. This application enables unusually high switching frequencies in kHz range thanks to the zero-volt ...
In spite of the dominance of ac technology for the vast majority of power transmission and distributionsince the late 19th century, the past decades have seen an increase in use of dc electrical power. Inparticular, this has been the case both in high volt ...
AC/DC power distribution networks use various types of power converters to interconnect their buses, active front ends between AC and DC buses, and DC transformers between DC buses. Different active front end control methods, like voltage or power regulati ...
The desire to increase the voltage of DC shipboard power distribution networks to the medium voltage level derives from the pressure to reduce the operating costs of such systems by increasing their efficiency. Solid state bus-tie switches are accepted to ...
Driven by the environmental changes, penetration of renewables and the need for more flexible power grid, DC is reemerging as a basis for future power networks. Already established in the area of HVDC for very long distance transmission, more and more atte ...
The desire to increase the voltage of DC shipboard power distribution networks to the medium voltage level derives from the pressure to reduce the operating costs of such systems by increasing their efficiency. Solid state bus-tie switches are accepted to ...
IEEE2020
,
The need to increase efficiency and reduce operating cost of shipboard DC power distribution networks results in a desire to increase the operating voltage of such installations to the medium voltage levels. Devices such as solid state bus-tie switches are ...
The classical electromagnetic time reversal (EMTR) fault location method in power systems can be time consuming, especially when a high location accuracy is desired. To cope with this issue, the concept of EMTR in mismatched media has recently been introdu ...
