Ultra Low Noise CMOS Image Sensors

CMOS Image Sensors (CIS) overtook the charge coupled devices (CCDs) in low noise performance. Photoelectron counting capability is the next step for CIS for ultimate low light performance and new imaging paradigms. This work presents a review of CMOS image sensors based on pinned photo diodes (PPDs). The latter includes the historical background, the PPD physics and the readout chain circuits used for low-noise performance. The physical mechanisms behind the random fluctuations affecting the signal at different levels of conventional CIS readout chains are reviewed and clarified. This thesis dedicates a particular focus to the readout circuit noise given that it precludes photoelectron counting in conventional CIS. A detailed analytical calculation of the temporal read noise (TRN) in conventional CIS readout chain is presented. The latter suggests different noise reduction techniques at process and circuit design level. Among the noise reduction techniques suggested by the analytical noise calculation, the increase of the oxide capacitance by using a thin oxide in-pixel amplifying transistor, for low 1/f noise, is suggested for the first time. A test chip designed in a 180 nm CIS process and embedding optimized readout chains exploiting the new pixels together with state-of-the-art 4T pixels optimized at process level for low 1/f noise. A mean input-referred noise of 0.4 e-rms has been measured. Compared with the state-of-the-art pixels, also present onto the test chip, the mean RMS noise is divided by more than 2. Based on these encouraging result, a full VGA (640H×480V) imager has been integrated in a standard CIS process. The presented imager relies on a 4T pixel of 6.5 µm pitch with a properly sized and biased thin oxide PMOS source follower. A full characterization of the proposed image sensor, at room temperature, is presented. The sensor chip features an input-referred noise histogram from 0.25 e-rms to a few e-rms peaking at 0.48 e-rms. This sub-0.5 electron noise performance is obtained with a full well capacity of 6400 e- and a frame rate that can go up to 80 fps. The VGA imager also features a fixed pattern noise as low as 0.77%, a lag of 0.1% and a dark current of 5.6 e-/s. Correlated multiple sampling (CMS) is a noise reduction technique commonly used in low noise CIS. This work presents an original design for CMS based on a passive switched-capacitor network, with a minimum number of capacitors. The proposed circuit requires no additional active circuitry, has no impact on the output dynamic range and does not need multiple analog-to-digital conversions. It was verified with transient noise simulations and shows a noise reduction in perfect agreement with ideal CMS. For a future perspective, the impact of the technology downscale on CIS sensitivity from an electronic read noise aspect is investigated. Active imaging in the Terahertz (THz) band is an emerging technology. Source modulation combined with a selective filtering can be us