Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The aim of this thesis is to get a deeper understanding of magnetic properties of small clusters when they are embedded in a host material. The study was motivated by the observation of the very peculiar properties that clusters present in the gas phase or ...
During the last years, permanent magnets synchronous motors have become a reference in the industrial world, both from the economical and the technical point of view, because of their very good performance in both regards. Thus, application of specific met ...
In the scope of the design activities for a 12.5 T dipole magnet, a short length of cable-in-conduit conductor (CICC) with steel jacket was prepared in spring 2005 as a pre-prototype of the high field dipole conductor. The small, rectangular conductor uses ...
The aim of this thesis work is to study the spin-dependent transport in multiwalled carbon nanotubes (MWNT). To do so, the electrical resistance of MWNT contacted between ferromagnetic electrodes has been measured, as a function of the contacts magnetic co ...
Piezoelectric motors are resonant vibromotors. They represent a new actuator generation in the field of servo-drives. In particular, the travelling wave ultrasonic motor presents a high torque at low speed, a zero speed torque without feeding, low sensitiv ...
We have realized a flexible force sensor, composed of four redundant capacitors, the operation of which is based on the measurement of a load-induced capacitance change. We use polyimide both as flexible substrate and as elastic dielectric between two leve ...
We formulate a generalized tunneling-percolation model that describes the electrical properties of conductor-insulator cellular disordered systems. This model predicts and explains the experimentally observed universal and nonuniversal behaviors of such pr ...
Within the framework of the European Fusion Programme (EFDA) a design activity has been started in late 2004 by the EFDA Close Support Unit at Garching (FRG) to design a 12.5 T superconducting dipole magnet. The final goal of this activity is to define a " ...
Magnetic diagnostics are essential for the operation and understanding of a magnetic fusion device. Magnetic data are used in real time to measure and control the current, shape, and position of the discharge; the thermal energy of the plasma; the confinin ...
Finite element numerical simulations were carried out in 2D geometries to map the magnetic field and force distribution produced by rectangular permanent magnets as a function of their size and position with respect to a microchannel. A single magnet, two ...
