Towards multifunctional building elements: thermal activation of a composite interior GFRP slab
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Thermally sprayed hardmetal coatings can be used to improve the wear or fatigue resistance of mechanical parts. Depending on the deposition conditions, their microstructure and phase composition are out of equilibrium at different levels due to the extreme ...
Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland2012
Improving the energy efficiency of cooling systems can contribute to reduce the emission of greenhouse gases. Currently, most microelectronic applications are air-cooled. Switching to two-phase cooling systems would decrease power consumption and allow for ...
This study examines experimentally the effect of stators on the performance and heat transfer characteristics of small axial cooling fans. A single fan impeller, followed by nine stator blades in the case of a complete stage, was used for all the experimen ...
A heating stage has been developed to perform in-situ annealing in a SEM equipped with an EBSD system in order to study recrystallization mechanisms. High temperature treatments could then be performed inside the SEM, up to 1180°C and with high heating and ...
A versatile and experimentally facile procedure for the synthesis of borophosphonate cages of the general formula [tBuPO3BR′]4 is described. The method involves heating of tert-butylphosphonic acid with a boronic acid in toluene to give borophosphonates in ...
The first cool-down of the EDIPO (European DIPOle) test facility is foreseen to take place in 2011 by means of the existing 1.2 kW cryoplant at EPFL-CRPP Villigen. In this work, the thermo-hydraulic analysis of the EDIPO cool-down is performed in order bot ...
This investigation examines experimentally the effect of stators on the performance curves and the heat transfer capabilities of small axial cooling fans. The experimental data indicated that the results are highly affected by the flow conditions at the fa ...
For the new test facility EDIPO (European DIPOle), to be hosted by CRPP, two 18 kA HIS current leads were manufactured and successfully tested. The HTS module, made of AgMgAu/Bi-2223 tapes, is cooled only by heat conduction to the cold end, while the coppe ...
Film cooling experiments are commonly performed with Pressure Sensitive Paint (PSP). The oxygen sensitive probe molecules allow for measurement of the adiabatic film cooling effectiveness by detecting the concentration of a tracer-gas with different oxygen ...
Shallow and deep geothermal resources can be used to produce different energy services, such as district heating, electricity and cooling. Some of these services vary throughout the year. To provide them, different conversion technologies can be used. In o ...