Processability, microstructure and precipitation of a Zr-modified 2618 aluminium alloy fabricated by laser powder bed fusion
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The paper is a review of original results, which were obtained by mechanical spectroscopy in the development of industrial materials, such as grey cast iron (damping capacity), aluminum alloys (recrystallization), nickel alloys (grain boundary embrittlemen ...
Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas2015
Recently, we have shown that minute Cr additions (typically 0.1 wt%) to Al-Zn alloys solidified in a uniform temperature field lead to the formation of fine equiaxed fcc Al grains [1]. Furthermore, these grains exhibit an unexpectedly large number of twin, ...
The interfacial shear strength (IFSS) between nickel-titanium (NiTi) shape memory alloy wires, characterized by a nonlinear stress-strain behavior, and epoxy matrix was determined by pull-out tests. Tests were carried out at several temperatures and levels ...
Zirconium is always present in Ni base superalloys as it enhances their creep properties. In the present study, the influence of very small Zr additions, 100–400 ppm, i.e. 0.01–0.04 wt.%, on hot tearing of IN738LCsuperalloy is experimentally investigated u ...
In this paper, a simple but realistic approach is presented to predict the as-quenched residual stress distribution in thick 7xxx aluminium alloy plates. Instead of modelling precipitation that occurs during quenching, a thermo-mechanical model is used who ...
The influence of microchemistry on the softening behaviour of two cold-rolled Al-Mn-Fe-Si alloys with different initial amounts of Mn (0.4 and 1.0. wt%) is studied. In addition to their as-cast conditions, the supersaturated Al-Mn-Fe-Si alloys were appropr ...
Investigation of the microstructural evolution of Al-Mn-Fe-Si alloys during annealing after cold rolling has been carried out. The effect of microchemistry state in terms of Mn in solid solution, constituents, size and volume fraction of dispersoids, intro ...
The physical basis and a mathematical formulation of a softening model nicknamed Alsoft, accounting for the combined effect of recovery and recrystallization during annealing of heavily deformed aluminium alloys have been presented. The prediction power of ...
The influence of the quench rate after solution treatment on the bendability of AA6016 aluminum alloy sheets was investigated. Crack initiation during bending tests is found to be independent of quench rate whereas crack propagation is decreased after rapi ...
Ferritic ODS steels containing 14 or 18 wt.% Cr are produced by mechanical alloying (MA), hot consolidation and cold working. This study focuses on the evolution of interstitials such as oxygen, nitrogen and carbon at each stage of the fabrication route by ...
