Active façades : life cycle environmental impacts and savings of photovoltaic power plants integrated into the building envelope

Aim and approach used Increased energy supply from photovoltaics is a main priority in the “Energy Strategy 2050”. Within the joint research project "Next generation photovoltaics" funded by the Swiss National Science Foundation, we analysed different options for the enhanced integration of photovoltaic technologies into the envelope of Swiss buildings (BIPV). The PV modules for building integration are using novel monolithic silicon heterojunction organometallic perovskite tandem cells (SHJ-PSC) with adaptions to improve the visual acceptance. In a joint effort of product developers, architects and scientists, this project aimed at providing pathways for the wide-scale use of BIPV façade solutions, and developing integrated designs based on emerging high-efficiency module technologies to improve the visual aspect and acceptance of PV systems installed in Switzerland. These so-called active façades incorporating BIPV modules to generate electricity can provide a significant contribution to the energy transition away from fossil and nuclear fuels. We compared the environmental impacts of different façade construction systems with and without SHJ-PSC BIPV modules with improved visual design, using a prospective life cycle assessment with a time horizon of 2025. The comparison includes a conventional brick and roughcast façade, a timber frame façade, and the Advanced Active Façade (AAF), which integrates SHJ-PSC BIPV modules in a low embodied impact façade substructure. In addition, we compared the environmental impacts caused by the construction of the above described façades with the environmental impacts saved due to the electricity produced by BIPV modules incorporated into the AAF. 2. Scientific innovation and relevance Our research focuses on the combined expertise of life cycle thinking, PV module development and façade design. The major scientific innovations are: 1) the prospective life cycle assessment of novel monolithic silicon heterojunction organometallic perovskite tandem cells (SHJ-PSC); 2) the comparison of different façade construction systems and their environmental impacts; 3) the quantification of the saved environmental impacts arising from the electricity generated by the active façade; and 4) the visual adjustments of PV modules to improve their acceptance. The main advantage of integrating PV into building façades is the large available area, which can be limited on rooftops. In order to reach the market penetration for PV required for the energy transition, PV modules must be integrated into façades as well as into rooftops. 3. Results and conclusions An equilibrium must be achieved among different technical and aesthetic issues when integrating energy generation systems into the building envelope, especially into the façade for its public condition and exposure. Based on these prerequisites, the research team has developed the AAF which combines passive and active energy design strategies while meeting contemporary architectural requirements. This façade design is based on low-embodied-energy construction principles, it is defined by a non-loadbearing wood-panel substructure and it integrates a double layer of natural insulation: cellulose and wood-fibre. In addition, its design incorporates an opaque SHJ-PSC BIPV façade-cladding following contemporary façade design trends. (Figure 1). The use of photovoltaic modules integrated into the façade cladding or roof will increase the environmental impact of the building envelope, compared to using conventional construction materials. The environmental impacts of the AAF using PV modules are two to four times higher compared to a conventional façade. The PV modules cause the highest share of greenhouse gas emissions of the AAF with about 375 kg CO2-eq per square meter (see Figure 2). The additional materials required to build the AAF including exterior panels, insulation and other materials cause about 75 kg CO2-eq per square meter of façade. The brick and timber frame façades cause greenhouse gas emissions around 200 and 100 kg CO2-eq, respectively. If the greenhouse gas emissions caused by the PV module is excluded this will result in a reduction between 25 and 125 kg CO2-eq per square meter of façade. However, the environmental impacts of the AAF are significantly reduced if the whole life cycle is considered due to the PV electricity produced by the building. Therefore, we calculated the saved greenhouse gas emissions due to the electricity produced by the advanced active façade and fed to the European electricity grid using the greenhouse gas emissions caused by the current European electricity mix as reference. These calculated savings due to the electricity produced by the BIPV are about 4 times higher than the impacts of the advanced active façade. Incorporating BIPV panels into building’s façades will cause net savings of about 1700 kg CO2-eq per square meter over the whole life cycle of BIPV façades, while simultaneously saving up to 125 kg CO2-eq per square meter of façade for the reduced material demand to build the façade (see Figure 3). We performed this analysis for 16 different environmental impacts according to the recommended midpoints by the Joint Research Council of the European Commission. The results were comparable to greenhouse gas emissions with the net saved environmental impacts being many times higher for all the environmental impacts analysed except mineral resource use caused by the indium used in the novel SHJ-PSC tandem module (see Figure 4). To conclude, the use of PV modules in AAF can reduce the greenhouse gas emissions per square meter of façade between 25 and 60 % if the production of the PV module and its produced electricity are excluded. If the production and life cycle of the PV modules are included into the analysis the AAF will cause net greenhouse gas savings up to four times higher than the production of the AAF itself. The results for environmental impacts other than greenhouse gases were similar except for mineral resource depletion. Overall, the building integration of photovoltaic modules as AAF will reduce the environmental impacts of the building while simultaneously providing a visually appealing building envelope.

Aim and approach used Increased energy supply from photovoltaics is a main priority in the “Energy Strategy 2050”. Within the joint research project "Next generation photovoltaics" funded by the Swiss National Science Foundation, we analysed different options for the enhanced integration of photovoltaic technologies into the envelope of Swiss buildings (BIPV). The PV modules for building integration are using novel monolithic silicon heterojunction organometallic perovskite tandem cells (SHJ-PSC) with adaptions to improve the visual acceptance. In a joint effort of product developers, architects and scientists, this project aimed at providing pathways for the wide-scale use of BIPV façade solutions, and developing integrated designs based on emerging high-efficiency module technologies to improve the visual aspect and acceptance of PV systems installed in Switzerland. These so-called active façades incorporating BIPV modules to generate electricity can provide a significant contribution to the energy transition away from fossil and nuclear fuels. We compared the environmental impacts of different façade construction systems with and without SHJ-PSC BIPV modules with improved visual design, using a prospective life cycle assessment with a time horizon of 2025. The comparison includes a conventional brick and roughcast façade, a timber frame façade, and the Advanced Active Façade (AAF), which integrates SHJ-PSC BIPV modules in a low embodied impact façade substructure. In addition, we compared the environmental impacts caused by the construction of the above described façades with the environmental impacts saved due to the electricity produced by BIPV modules incorporated into the AAF. 2. Scientific innovation and relevance Our research focuses on the combined expertise of life cycle thinking, PV module development and façade design. The major scientific innovations are: 1) the prospective life cycle assessment of novel monolithic silicon heterojunction organometallic perovskite tandem cells (SHJ-PSC); 2) the comparison of different façade construction systems and their environmental impacts; 3) the quantification of the saved environmental impacts arising from the electricity generated by the active façade; and 4) the visual adjustments of PV modules to improve their acceptance. The main advantage of integrating PV into building façades is the large available area, which can be limited on rooftops. In order to reach the market penetration for PV required for the energy transition, PV modules must be integrated into façades as well as into rooftops. 3. Results and conclusions An equilibrium must be achieved among different technical and aesthetic issues when integrating energy generation systems into the building envelope, especially into the façade for its public condition and exposure. Based on these prerequisites, the research team has developed the AAF which combines passive and active energy design strategies while meeting contemporary architectural requirements. This façade design is based on low-embodied-energy construction principles, it is defined by a non-loadbearing wood-panel substructure and it integrates a double layer of natural insulation: cellulose and wood-fibre. In addition, its design incorporates an opaque SHJ-PSC BIPV façade-cladding following contemporary façade design trends. (Figure 1). The use of photovoltaic modules integrated into the façade cladding or roof will increase the environmental impact of the building envelope, compared to using conventional construction materials. The environmental impacts of the AAF using PV modules are two to four times higher compared to a conventional façade. The PV modules cause the highest share of greenhouse gas emissions of the AAF with about 375 kg CO2-eq per square meter (see Figure 2). The additional materials required to build the AAF including exterior panels, insulation and other materials cause about 75 kg CO2-eq per square meter of façade. The brick and timber frame façades cause greenhouse gas emissions around 200 and 100 kg CO2-eq, respectively. If the greenhouse gas emissions caused by the PV module is excluded this will result in a reduction between 25 and 125 kg CO2-eq per square meter of façade. However, the environmental impacts of the AAF are significantly reduced if the whole life cycle is considered due to the PV electricity produced by the building. Therefore, we calculated the saved greenhouse gas emissions due to the electricity produced by the advanced active façade and fed to the European electricity grid using the greenhouse gas emissions caused by the current European electricity mix as reference. These calculated savings due to the electricity produced by the BIPV are about 4 times higher than the impacts of the advanced active façade. Incorporating BIPV panels into building’s façades will cause net savings of about 1700 kg CO2-eq per square meter over the whole life cycle of BIPV façades, while simultaneously saving up to 125 kg CO2-eq per square meter of façade for the reduced material demand to build the façade (see Figure 3). We performed this analysis for 16 different environmental impacts according to the recommended midpoints by the Joint Research Council of the European Commission. The results were comparable to greenhouse gas emissions with the net saved environmental impacts being many times higher for all the environmental impacts analysed except mineral resource use caused by the indium used in the novel SHJ-PSC tandem module (see Figure 4). To conclude, the use of PV modules in AAF can reduce the greenhouse gas emissions per square meter of façade between 25 and 60 % if the production of the PV module and its produced electricity are excluded. If the production and life cycle of the PV modules are included into the analysis the AAF will cause net greenhouse gas savings up to four times higher than the production of the AAF itself. The results for environmental impacts other than greenhouse gases were similar except for mineral resource depletion. Overall, the building integration of photovoltaic modules as AAF will reduce the environmental impacts of the building while simultaneously providing a visually appealing building envelope.

Reducing Greenhouse Gas emissions is not the only solution

With the increasing strength and frequency of climate change events, the urgency to mitigate climate change impact is ever so important. Canada reported his Nationally Determined Contribution (NDC) and submitted its ambition to reduce his Greenhouse Gas (GHG) emissions by 40-45% by 2030 compared to 2005 and reach net-zero emissions by 2050. Interest for energy system modelling has been increasing for planning future energy systems, as a result of growing concern for sustainable development and transition towards renewable energies. Nevertheless, planning a decarbonization of energy system can potentially lead to environmental burden shifting, and can increase impacts on other environmental impacts such as ecosystem quality or human health. Thus, this project aims towards integrating Life Cycle Analysis (LCA) and more specifically Life Cycle Impact Assessment (LCIA) within Energy Systems Modelling, in order to minimize not only climate change impacts, but human health and ecosystem quality. In addition, a dual spatial resolution was integrated in the model in order to increase data precision and computational efficiency. The results show that a low-carbon energy system, based on the optimization of GHG emissions allows to greatly reduce all the environmental impacts under analysis, compared to an all economic- based energy system, but a multi-objective optimization allows to simultaneously reduce impacts on ecosystem quality and human health, while reducing GHG emissions and keeping good economical and technical performances. The results also show that it is theoretically possible for Canada to keep on track with their emission reduction ambition by 2030, by deploying more renewable energies. This project does not allow assessing Canada’s potential to reach net-zero emissions, as environmental impacts from carbon capture technologies are still to be characterized and integrated in the model.

2022

Le mur à haute performance thermique

Thierry Voellinger

The scope of this research includes the development of composite concrete façade elements that are thin, loadbearing and of high thermal performance. The research applies to manufactured precast concrete elements and focuses on improving their structure in terms of their construction but also their cost and environmental impact. During the last four decades, society’s energy efficiency awareness has been steadily growing in everyday life and in scientific circles. The Swiss Federal Institutes of Technology are promoting a plan known as the 2000 Watt Society (Société à 2000 Watts) which would reduce the energy consumption of the country’s inhabitants. In the context of Swiss construction, Minergie type labels are a requirement ensuring improved living conditions at lower energy consumption levels. These new ambitions increase the thermal requirements which in turn lead to the inevitable thickening of the building envelope. In a Swiss urban context, such as the Geneva region in particular, land is increasingly rare and the price of leasable surface continues to rise. As a result, the materials commonly used for insulation are economical but bulky ; they increase the thickness of the façades and significantly reduce the usable surface available for buildings. In an urban context such as this, what is the suitable dimension and fair price of a wall ? The method used was to analyze the strategies that would result in the correct dimensions of high thermal performance walls. Diminishing their width increases the area of livable surface while maintaining the wall’s thermal, static and sustainable standards. The objective was to establish a process for determining the composition of products that carry the Minergie-P and Minergie-Eco label. To this end, several tests and a pilot project for an individual house were carried out using optimum high thermal performance precast concrete walls as a model. The test demonstrated the feasibility of this type of wall. The innovation was to place between the two layers of concrete, a high thermal performance Vacuum Insulated Panel (VIP) type material and a traditional one. This combination allowed optimizing the thickness of the wall while responding to construction constraints. The proportion of the combination of insulation materials was selected according to their thermal performance, environmental impact and price. The goal was to maintain a constant thickness from the stages of project design to its completion. The argument of this dissertation is based on the conviction and the importance to commit to the use of high thermal performance construction materials overall in the future. At present, in the midst of a fossil fuel crisis, this is no longer just an individual concern. Indeed, the scarcity of fossil fuels and global warming are vital and critical problems that can be solved by using appropriate architecture solutions such as heat traps.

EPFL2012

Le mur à haute performance thermique

Thierry Voellinger

EPFL2012