Evaluation of inkjet-printed spinel coatings on standard and surface nitrided ferritic stainless steels for interconnect application in solid oxide fuel cell devices
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Sensors capable of detecting and classifying volatile organic compounds (VOC) have been gaining more attention by the advent of internet-of-things (IoT) enabled devices and integration of various sensing elements into hand-held and portable devices. The re ...
The transition in energy matrix, from fossil to renewable energy sources, will require the utilization of grid levelling alternatives to cope with the intermittent characteristic of renewable energy. Advanced electrochemical energy conversion and storage d ...
Inspired from additive manufacturing's success, the structuring of biocompatible materials through bioprinting has become a growing field of research in the past fifteen years. It opened the door to a plethora of applications ranging from the fabrication o ...
This paper presents a novel approach for the fabrication of miniaturized and fully printed metal-oxide (MOX) gas sensors on a polyimide (PI) substrate by using digital manufacturing of the functional layers, namely aerosol jet and inkjet printing technolog ...
Solid oxide fuel cells (SOFCs) can convert hydrocarbon fuels, such as methane, into heat and electricity with a high conversion efficiency. The fuel flexibility of the SOFC derives from the high operating temperature (600-900 °C). Such a high temperature s ...
Solid oxide fuel cells (SOFCs) are approaching commercialization to improve power production efficiency. Currently, cost and lifetime reliability limit their spread in the market. The SOFC is ceramic-based, but refractory metal alloys are in fact the major ...
Continuous hydrothermal flow synthesis (CHFS) of Ni-Fe layered double hydroxide (LDH) leads to waterborne dispersions of 2D nanoplatelets in the range of 10-50 nm in lateral size. Conversion of the as-synthesized LDH nanoplatelet dispersion into inkjet pri ...
AbstractThe degradation of metal interconnects (ICs) in Solid Oxide Cells (SOCs) primarily results from chromium (Cr) oxide scale growth on stainless-steel substrates, causing ohmic loss and air-side electrode poisoning by Cr. This thesis addresses these c ...
Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...
Inkjet printing of electrochemical sensors using a highly loaded mildly edge‐oxidized graphene nanosheet (EOGN) ink is presented. An ink with 30 mg/mL EOGNs is formulated in a mixture of N‐methyl pyrrolidone and propylene glycol with only 30 min of sonicat ...
