Publication

Relaxation time shift of Cobalt related internal friction peak in WC-Co cemented carbide

Related publications (34)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Optimization of composition and structure of cemented carbide cutting tools

Samy Adjam

WC-Co cemented carbides are composites, which combine a hard phase consisting of WC grains and a metallic ductile phase as a binder. Their excellent mechanical properties, combining high hardness, toughness and refractory properties, make them excellent ma ...

EPFL2021

In situ X-ray diffraction and the internal friction study of the binary yellow 18-carat gold alloy

Daniele Mari

Phase transitions in AuCu alloy are investigated using in situ temperature XRD and mechanical spectroscopy. The measurements are carried out from room temperature up to 973 K starting from the ordered phase AuCuI. Using a temperature ramp rate of 1 K/min, ...

ELSEVIER SCIENCE SA2019

The Contribution of Mechanical Spectroscopy to Understanding Grain Boundary Sliding

Daniele Mari

This review paper shows that grain boundary sliding (GBS) is a general phenomenon occurring in all classes of inorganic materials: ceramics, metals and composite materials. The occurrence of relaxations attributed to GBS is also quite general and therefore ...

UNIV FED SAO CARLOS, DEPT ENGENHARIA MATERIALS2018

MECHANICAL SPECTROSCOPY OF ORDERED BINARY Au-Cu

Daniele Mari, Robert Schaller, Iva Tkalcec Vâju

We have studied a binary Au-Cu single crystal by mechanical spectroscopy. Upon very slow cooling from high temperatures, additional relaxation peaks arise at lower frequencies in isothermal spectra after the disappearing of the Zener peak below 665 K due t ...

Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas2015

Applications Of Mechanical Spectroscopy To Industrial Materials

Robert Schaller

The paper is a review of original results, which were obtained by mechanical spectroscopy in the development of industrial materials, such as grey cast iron (damping capacity), aluminum alloys (recrystallization), nickel alloys (grain boundary embrittlemen ...

Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas2015

, ,

Different Au-Ag-Cu samples have been studied by mechanical spectroscopy. Both polycrystals and bi-crystals show a relaxation peak at 800 K, accompanied by an elastic modulus change. Since this peak is absent in single crystals it is related to the presence ...

Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas2015

High/room temperature mechanical properties of 3Y-TZP/CNTs composites

Robert Schaller, Mehdi Mazaheri

Spark Plasma Sintering (SPS) method was practiced, in the current investigation, to obtain fully dense materials with an excellent dispersion of MWCNTs (Multi-walled Carbon Nanotubes) within the matrix. Scanning and transmission electron microscopy microgr ...

Elsevier Sci Ltd2014

Theoretical modelling of grain boundary anelastic relaxations

Daniele Mari, Robert Schaller, Iva Tkalcec Vâju

Grain boundary stress relaxation in Au polycrystals and single crystals has been studied by mechanical spectroscopy. A relaxation peak related to grain boundaries is observed at 620 K. Molecular dynamics simulations on Au are performed in order to illustra ...

Pergamon-Elsevier Science Ltd2014

High Temperature Behavior of Nano-Structured Ceramic Composites Studied by Mechanical Spectroscopy

Mehdi Mazaheri

Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...

EPFL2013

High temperature transformations in a steel-TiCN cermet

Daniele Mari

The influence of the carbon content on the microstructure, phase transformation and hardness of an iron-based cermet is studied. The cermet is constituted by a high-alloyed steel as matrix, and TiCN particles (50 vol.%) as reinforcement. The material is pr ...

Elsevier Sci Ltd2013