Publication
The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay
Related publications (75)
Influence of Low- to Medium-Kaolinite Clay on the Durability of Limestone Calcined Clay Cement (LC3) Concrete
The kaolinite content is principally responsible for the durability performance of Limestone Calcined Clay Cement (LC3), which calls into question its global applicability. The clay supply has a significant impact on the LC3 system's reduced carbon footpri ...
MDPI2023Durability Challenges of Low-Grade Calcined Clay Opposed to High-Volume Fly Ash in General Purpose Concrete
With the decrease in availability of common supplementary cementitious materials (SCMs) such as fly ash in Europe, the search for appropriate SCMs should be dealt with locally. A com-bination of abundant low-grade calcined clay and limestone powder has pro ...
AMER SOC TESTING MATERIALS2023Characterisation and hydration kinetics of beta-C2S synthesised with K2SO4 as dopant
Karen Scrivener, Franco Alberto Zunino Sommariva, Shashank Bishnoi, Sreejith Krishnan
In this study, a protocol for synthesising beta-C2S using K2SO4 as a dopant has been reported. Quantitative X-Ray diffraction was used to characterise synthesised samples. It was observed that it is possible to synthesise beta-C2S with high purity (>96 wt% ...
PERGAMON-ELSEVIER SCIENCE LTD2023Unsupervised Electrofacies Clustering Based on Parameterization of Petrophysical Properties: A Dynamic Programming Approach
François Fleuret, Karthigan Sinnathamby
Electrofacies using well logs play a vital role in reservoir characterization. Often, they are sorted into clusters according to the self-similarity of input logs and do not capture the known underlying physical process. In this paper, we propose an unsupe ...
SOC PETROPHYSICISTS & WELL LOG ANALYSTS-SPWLA2023Morphology and Transport Characterization of Catalyst Layers for CO2 Reduction
Sophia Haussener, Francesca Lorenzutti
Gas diffusion electrodes (GDEs) help to reduce transport limitations in devices for electrochemical CO2 reduction. Homogenized modeling of such devices requires input of morphological characteristics and effective transport properties of the porous structu ...
20233-D contact and pore network analysis of MICP cemented sands
The study describes a comprehensive methodology to evaluate X-Ray micro-computed tomography data from sand samples and to characterize their 3D microstructural properties. Fine and medium-grained sands are analyzed in their natural and bio-cemented states. ...
SPRINGER2023Nanoscale modelling of ionic transport in the porous C-S-H network
To reduce the CO2 footprint of construction materials, concrete producers blend their cement with Supplementary Cementitious Materials (SCMs). SCMs such as fly ash or blast furnace slag are mostly the byproducts of other industries. And while SCMs are chos ...
EPFL2022Oxidation of pyrite (FeS2) and troilite (FeS) impurities in kaolinitic clays after calcination
Karen Scrivener, Franco Alberto Zunino Sommariva
Valorisation of locally available clays for producing blended cements is crucial for a widespread adoption of sustainable binders incorporating these materials. In some places, clays can be intermixed with small amounts of iron sulfides, which could eventu ...
SPRINGER2022Resistance of cementitious materials to sulfate attack: quantifying performance with a reliable unidirectional approach
Depending on the environmental conditions, concrete materials can come into contact with sulfate ions which are widely present in rivers, underground water, sewers, seawater and soil. Sulfates can react with the cement paste in concrete and cause damage wh ...
EPFL2022Reactive dicalcium silicate binders: Microstructure and transport properties
The calcium silicate hydrates (C-S-H) are without doubt one of the most important hydration products in a hardened cement paste. Giving the complexity of the microstructure that forms by hydration of ordinary Portland cement (OPC) and the more recently use ...
EPFL2022