Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This thesis is an exploration of deformation and fracture properties of a novel two-phase α2 + γ Ti46Al8Ta (at.%) alloy featuring a "convoluted" microstructure, produced by partners within a European Union project named IMPRESS. Properties of this alloy ar ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
Aluminum zinc alloys constitute an important class of wrought alloys, the so-called 7000 series, and are also widely used as anti-corrosion coatings of steel sheets. They are also interesting from a more fundamental point of view because zinc, a hexagonal ...
The threshold pressure P-0 for infiltration of Al-12 wt.% Si alloy into compacts of mixtures of alumina and silicon carbide particles having largely different size is investigated. The results are in line with those recently derived from infiltrations of A ...
The subject of this work is focused on characterization of the microstructures and orientations of SiC crystals synthesized in diamond–SiC–Si composites using reactive microwave sintering. The SiC crystals grown on the surfaces of diamonds have either shap ...
Ferritic ODS steels containing 14 or 18 wt.% Cr are produced by mechanical alloying (MA), hot consolidation and cold working. This study focuses on the evolution of interstitials such as oxygen, nitrogen and carbon at each stage of the fabrication route by ...
We show that steel-magnesium alloy laminated metal composites (LMCs) can be produced by gas pressure infiltration of a liquid magnesium alloy between layers of stacked dimpled steel sheets. Resulting LMCs are amenable to subsequent warm rolling. The LMCs a ...
In this work, the tribocorrosion behavior of Ti-12.5Mo, Ti-13Nb-13Zr and Ti-29Nb-13Ta-4.6Zr beta titanium alloys which are candidate biomaterials for joint prostheses is studied against ultra high molecular weight polyethylene in Hank's balanced salt solut ...
The formation of twinned dendrites (feathery grains) in binary Al-Zn, Al-Mg, Al-Cu and Al-Ni alloys has been studied in specimens directionally solidified under identical thermal conditions, i.e. G approximate to 100 K cm(-1), v approximate to 1 mm s(-1), ...
Two types of oxide dispersion strengthened (ODS) ferritic steels, with the composition of Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) (in weight percent), have been produced by mechanically alloying elemental powders of Fe, Cr, W, and Ti with Y2O3 particles either in arg ...
