Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Ferritic ODS steels containing 14 or 18 wt.% Cr are produced by mechanical alloying (MA), hot consolidation and cold working. This study focuses on the evolution of interstitials such as oxygen, nitrogen and carbon at each stage of the fabrication route by ...
The threshold pressure P-0 for infiltration of Al-12 wt.% Si alloy into compacts of mixtures of alumina and silicon carbide particles having largely different size is investigated. The results are in line with those recently derived from infiltrations of A ...
The subject of this work is focused on characterization of the microstructures and orientations of SiC crystals synthesized in diamond–SiC–Si composites using reactive microwave sintering. The SiC crystals grown on the surfaces of diamonds have either shap ...
This thesis is an exploration of deformation and fracture properties of a novel two-phase α2 + γ Ti46Al8Ta (at.%) alloy featuring a "convoluted" microstructure, produced by partners within a European Union project named IMPRESS. Properties of this alloy ar ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
The formation of twinned dendrites (feathery grains) in binary Al-Zn, Al-Mg, Al-Cu and Al-Ni alloys has been studied in specimens directionally solidified under identical thermal conditions, i.e. G approximate to 100 K cm(-1), v approximate to 1 mm s(-1), ...
Aluminum zinc alloys constitute an important class of wrought alloys, the so-called 7000 series, and are also widely used as anti-corrosion coatings of steel sheets. They are also interesting from a more fundamental point of view because zinc, a hexagonal ...
In this work, the tribocorrosion behavior of Ti-12.5Mo, Ti-13Nb-13Zr and Ti-29Nb-13Ta-4.6Zr beta titanium alloys which are candidate biomaterials for joint prostheses is studied against ultra high molecular weight polyethylene in Hank's balanced salt solut ...
We show that steel-magnesium alloy laminated metal composites (LMCs) can be produced by gas pressure infiltration of a liquid magnesium alloy between layers of stacked dimpled steel sheets. Resulting LMCs are amenable to subsequent warm rolling. The LMCs a ...
Two types of oxide dispersion strengthened (ODS) ferritic steels, with the composition of Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) (in weight percent), have been produced by mechanically alloying elemental powders of Fe, Cr, W, and Ti with Y2O3 particles either in arg ...
