Publications related to Interlocking modular microfluidic cooling substrates for future high energy physics experiments

35 years of photovoltaics: Analysis of the TISO-10-kW solar plant, lessons learnt in safety and performance-Part 1

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Eleonora Annigoni

The TISO-10-kW solar plant, connected to the grid in 1982, is the oldest installation of this kind in Europe. Its history is well documented, and the full set of modules has been tested indoors at regular intervals over the years. After 35 years of operati ...

WILEY2019

Jordan blocks of unipotent elements in some irreducible representations of classical groups in good characteristic

Mikko Tapani Korhonen

Let

G

be a classical group with natural module

V

over an algebraically closed field of good characteristic. For every unipotent element

u

of

G

, we describe the Jordan block sizes of

u

on the irreducible

G

-modules which occur as compositio ...

2019

Thermal Interface Material Enablement of Off-Board Two-Phase Cooling

John Richard Thome, Raffaele Luca Amalfi

Two-phase, refrigerant-based cooling offers significant promise for increasing heat densities and energy efficiencies of electronic components. One barrier to wide spread adoption of two-phase cooling solutions is preserving product features deemed essenti ...

IEEE2018

On the Influence of Thermal Mass and Natural Ventilation on Overheating Risk in Offices

Flourentzos Flourentzou, Thomas Bernard Paul Jusselme, Arianna Brambilla, Jérôme Philippe Bonvin

Free cooling strategies are gaining importance in design practice due to the increased risk of overheating in well-insulated buildings with high internal loads such as offices. The state of the art highlights that the most efficient passive solution for in ...

2018

Experimental characterisation of the thermohydraulic performance of a micro-pin fin evaporator: Heat transfer, flow visualization and modelling

Chiara Falsetti

The global tendency towards miniaturization driven by the microelectronics industry is pushing system density and packaging towards unprecedented values of thermal design power, with a dramatic reduction of the surface area of the devices. Vertical integra ...

EPFL2018

On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding

Jean-Marie Drezet

Aluminum alloy AA6061 was welded to dual-phase steel 980 (DP980) by the friction melt bonding (FMB) process. Hot tears have been suppressed by controlling the thermomechanical cycle. In particular, the welding speed and the thermal conductivity of the back ...

2018

Influence of the thickness of a nanometric copper interlayer on Au/dielectric thermal boundary conductance

Ludger Weber, Maïté Blank

The influence of the thickness of a thin (1.5-30 nm) copper layer on the thermal boundary conductance (TBC) at the interface between gold and silicon, sapphire and diamond, respectively, was studied using Time Domain Thermoreflectance. Overall, a monotonic ...

AMER INST PHYSICS2018

Experimental evaluation of the thermal performances of a thermosyphon cooling system rejecting heat by natural and forced convection

John Richard Thome, Filippo Cataldo

In the present paper, a closed-loop thermosyphon cooling system for power electronics has been developed and tested. The evaporator is a multi-microchannel heat sink designed for high heat fluxes. The power electronics module is emulated by four independen ...

Pergamon-Elsevier Science Ltd2017

Thermal Modeling and Experimental Verification of an Air Cooled Medium Frequency Transformer

Drazen Dujic, Marko Mogorovic

This paper provides detailed analytical modeling and finite elements method (FEM) analysis of the thermal behavior of the medium frequency transformer (MFT). A comprehensive analytical model in form of a thermal network consisting of conduction, convection ...

Ieee2017

Development of interconnected silicon micro-evaporators for the on-detector electronics cooling of the future ITS detector in the ALICE experiment at LHC

John Richard Thome, Alessandro Mapelli, Andrea Francescon, Giulia Romagnoli

The thermal management of the on-detector electronics and the development of low mass integrated cooling systems have become a crucial task in the design of silicon tracking detectors for high energy physics applications. The use of microfabricated ultra-t ...

Pergamon-Elsevier Science Ltd2016

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Graph Chatbot

Chat with Graph Search

35 years of photovoltaics: Analysis of the TISO-10-kW solar plant, lessons learnt in safety and performance-Part 1

Jordan blocks of unipotent elements in some irreducible representations of classical groups in good characteristic

Thermal Interface Material Enablement of Off-Board Two-Phase Cooling

On the Influence of Thermal Mass and Natural Ventilation on Overheating Risk in Offices

Experimental characterisation of the thermohydraulic performance of a micro-pin fin evaporator: Heat transfer, flow visualization and modelling

On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding

Influence of the thickness of a nanometric copper interlayer on Au/dielectric thermal boundary conductance

Experimental evaluation of the thermal performances of a thermosyphon cooling system rejecting heat by natural and forced convection

Thermal Modeling and Experimental Verification of an Air Cooled Medium Frequency Transformer

Development of interconnected silicon micro-evaporators for the on-detector electronics cooling of the future ITS detector in the ALICE experiment at LHC

Thermal Interface Material Enablement of Off-Board Two-Phase Cooling

Jordan blocks of unipotent elements in some irreducible representations of classical groups in good characteristic

35 years of photovoltaics: Analysis of the TISO-10-kW solar plant, lessons learnt in safety and performance-Part 1

Influence of the thickness of a nanometric copper interlayer on Au/dielectric thermal boundary conductance

Experimental characterisation of the thermohydraulic performance of a micro-pin fin evaporator: Heat transfer, flow visualization and modelling

On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding

Experimental evaluation of the thermal performances of a thermosyphon cooling system rejecting heat by natural and forced convection

On the Influence of Thermal Mass and Natural Ventilation on Overheating Risk in Offices

Thermal Modeling and Experimental Verification of an Air Cooled Medium Frequency Transformer

Development of interconnected silicon micro-evaporators for the on-detector electronics cooling of the future ITS detector in the ALICE experiment at LHC