Optimisation of a Thick-Film 10...400 N Force Sensor

Related publications (29)

Page 3 of 3

About
Privacy
Disclaimer

Graph Chatbot

Design, analysis, testing and applications of two-body and three-body kinematic mounts

Johannes Richard Cornelis Geerit Kruis

Kinematic couplings are used when two rigid bodies need to be repeatedly and accurately positioned with respect to each other. They allow for sub-micron positioning repeatability by suppressing play and reducing strains in the bodies. Typical applications ...

EPFL2016

Polar Codes for Arbitrary DMCs and Arbitrary MACs

Emre Telatar, Rajai Nasser

Polar codes are constructed for arbitrary channels by imposing an arbitrary quasi-group structure on the input alphabet. Just as with usual polar codes, the block error probability under successive cancellation decoding is O(2^(-N^(1/2-epsilon))), where N ...

Institute of Electrical and Electronics Engineers2016

Influence of boundary conditions on the out-of-plane response of brick masonry walls in buildings with RC slabs

Katrin Beyer, Marco Tondelli

In modern unreinforced masonry buildings with stiff RC slabs, walls of the top ﬂoor are most susceptible to out-of-plane failure. The out-of-plane response depends not only on the acceleration demand and wall geom-etry but also on the static and kinematic ...

2016

Systematic errors of skin-friction measurements by oil-film interferometry

Peter Monkewitz, Jean-Daniel Rüedi

In recent years, the independent measurement of wall shear stress with oil-film or oil-drop interferometry has become a cornerstone of turbulent-boundary-layer research as many arguments depend critically on a precise knowledge of the skin friction tau(w)* ...

Cambridge University Press2015

Physical Layer Cooperation : Theory and Practice

Ayan Sengupta

Information theory has long pointed to the promise of physical layer cooperation in boosting the spectral efficiency of wireless networks. Yet, the optimum relaying strategy to achieve the network capacity has till date remained elusive. Recently however, ...

EPFL2015

Punching of flat slabs supported on rectangular columns

Aurelio Muttoni, Miguel Fernández Ruiz, Juan Sagaseta Albajar, Luca Tassinari

This paper investigates the structural behaviour of RC flat slabs supported on rectangular interior columns and the influence of the loading conditions (one or two-way bending) on their punching shear strength. The punching shear strength of slabs at recta ...

Engineering Structures2014

SenseCode: Network Coding for Reliable Sensor Networks

Aikaterini Argyraki, Christina Fragouli, Lorenzo Keller, Emre Atsan

Designing a communication protocol for sensor networks often involves obtaining the right trade-off between energy efficiency and end-to-end packet error rate. In this article, we show that network coding provides a means to elegantly balance these two goa ...

Assoc Computing Machinery2013

A 2.78 mm2 65 nm CMOS Gigabit MIMO Iterative Detection and Decoding Receiver

Andreas Peter Burg

Iterative detection and decoding (IDD), combined with spatial-multiplexing multiple-input multiple-output (MIMO) transmission, is a key technique to improve spectral efﬁciency in wireless communications. In this paper we present the—to the best of our know ...

2012

A new boundary condition for large-eddy simulation of boundary-layer flow over surface roughness transitions

Fernando Porté Agel, Mahdi Abkar

Large-eddy simulations are performed to evaluate the performance of the surface boundary condition downwind of a rough-to-smooth surface transition. Two types of boundary conditions are tested: (1) The standard formulation based on local application of the ...

Taylor & Francis2012

Page 3 of 3