First characterization of the SPIDER beam AC component with the Beamlet Current Monitor
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Among the beam diagnostics routinely employed in source for production of ion of deuterium (SPIDER), beam emission spectroscopy (BES) provides valuable information for beam characterization, thus driving source optimization methods. In particular, this tec ...
Gas-insulated switchgear (GIS) are some of the most reliable and most expensive equipment that are nowadays used in power systems. Condition monitoring of the power system equipment can help operators detect defects like partial discharges (PDs) early, pre ...
The ITER Heating Neutral Beam (HNB) source prototype SPIDER (Source for the Production of Ions of Deuterium Extracted from a Radio frequency plasma), hosted at the Neutral Beam Test Facility (NBTF) in Padova, Italy, has recently started operating with evap ...
After the second Deuterium-Tritium Campaign (DTE2) in the JET tokamak with the ITER-Like Wall (ILW) and full tritium campaigns that preceded and followed after the DTE2, a sequence of fuel recovery methods was applied to promote tritium removal from wall c ...
SPIDER is the 100 keV full-size Negative Ion Source prototype of the ITER Neutral Beam Injector, operating at Consorzio RFX in Padova, Italy. The largest Negative Ion Source in the world, SPIDER generates an RF driven plasma from which Deuterium or Hydroge ...
To reach fusion conditions and control the plasma configuration in ITER, the next step in tokamak fusion research, two neutral beam injectors (NBIs) will supply 16.5 MW each, by neutralizing accelerated negative hydrogen or deuterium ions. The requirements ...
2021
In the wide range of applications for power supplies, the ones dedicated to feeding superconducting magnets occupy a niche. This particular kind of magnets has the intrinsic property of having zero resistance, and is only used in high-end facilities for fu ...
EPFL2020
, , , , ,
After an initial testing period at the Karlsruhe Institute of Technology, the upgraded EU 1 MW, 170 GHz continuous wave (CW) industrial prototype gyrotron (TH1509U) for Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) in ITER has been trans ...
The high-current delivered by a dedicated power supply is the condicio sine qua non to obtain the strong magnetic field produced by superconducting magnets. The end goal of such power supply is to control the current, very precisely, across this distinctiv ...
The high-current delivered by a dedicated power supply is the condicio sine qua non to obtain the strong magnetic field produced by superconducting magnets. The end goal of such power supply is to control the current, very precisely, across this distinctiv ...
