3-D contact and pore network analysis of MICP cemented sands
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
To reduce the CO2 footprint of construction materials, concrete producers blend their cement with Supplementary Cementitious Materials (SCMs). SCMs such as fly ash or blast furnace slag are mostly the byproducts of other industries. And while SCMs are chos ...
The objective of this study is to analyse the mechanical and durability properties of a high-performance mortars based on low grade kaolin clay and the effect of electrical conductivity and pore microstructure on the chloride penetration resistance. A tota ...
The reaction kinetics of the alkali silica reaction depends on the composition of the pore solution. The evolution of the pore solution composition in different cement pastes and concretes was studied. Pastes containing silica fume or metakaolin had the lo ...
Exposure of concrete to the atmosphere changes the microstructure of the cement paste. However, knowledge about the alteration of the porosity due to drying is typically not considered in deterioration processes of the hardened cement paste. The purpose of ...
The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...
EPFL2020
,
A multi-disciplinary approach is adopted in the present work towards investigating bio-cemented geo-materials which extends from sample preparation, to microstructural inspection and mechanical behaviour characterization. We suggest a new way to induce “ce ...
2019
, ,
In this paper, compacts of synthetic calcium silicate hydrate (C-S-H) with 0.8-1.5 calcium-to-silicon ratio (Ca/Si) and 30-80% porosity were prepared by one-direction cold pressing. The Young's modulus and the creep of C-S-H compacts were measured by micro ...
PERGAMON-ELSEVIER SCIENCE LTD2020
Purpose This paper aims to develop a numerical, micromechanical model to predict the evolution of autogenous shrinkage of hydrating cement paste at early age (up to 7 days). Autogeneous shrinkage can be important in high-performance concrete characterized ...
EMERALD GROUP PUBLISHING LTD2020
By studying approximately a century of cement and concrete in Switzerland, this project examines the relations between institutions, discourse, and technology as they intersect in the material. The project is framed so that the establishment of organizatio ...
ETH Zurich2020
Depending on the environmental conditions, concrete materials can come into contact with sulfate ions which are widely present in rivers, underground water, sewers, seawater and soil. Sulfates can react with the cement paste in concrete and cause damage wh ...
