Low Power LDPC Decoding by Reliable Voltage Down-Scaling

Andreas Peter Burg
2023
Conference paper

Low-Density Parity-Check (LDPC) decoder is among the power hungry building blocks of wireless communication systems. Voltage scaling down to Near-Threshold (NT) voltages substantially improves energy efficiency, in theory up 10x. However, tuning the voltage and clock frequency to the optimum error free operating point is challenging. This is mainly due to exacerbated sensitivity to Process, Voltage and Temperature (PVT) variations at reduced voltages. By definition, in many telecommunication standards, a Cyclic Redundancy Check (CRC) error detection is carried out after each forward error correction operation, e.g., LDPC decoding. Given channel information, successful CRC checking opens an opportunity for "safe" voltage down-scaling and optimum frequency tuning of LDPC decoder hardware. The strategy is explored on a Zynq System-on-Chip with CRC guiding the adaptive voltage scaling with microcontroller and LDPC decoder residing in different voltage islands. Around 40% power saving was achieved with negligible degradation in throughput.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Andreas Peter Burg
2023
Conference paper

Abstract

Official source

https://infoscience.epfl.ch/record/308250?ln=en

About this result

Related concepts (32)

Related publications (63)

Related MOOCs (4)

Towards Efficient Correction of Coconut Tree Detection Errors

Devis Tuia, Diego Michael Schibli

Coconut tree plantations are one of the main sources of income in several South Pacific countries. Thus, keeping track of the location of coconut trees is important for monitoring and post-disaster assessment. Although deep learning based object detectors ...

IEEE2022

On the Universality of Low-Density Parity-Check Block Codes

Rüdiger Urbanke, Wei Liu

An important class of modern channel codes is the capacity-achieving sequences of low-density parity-check block codes. Such sequences are usually designed for the binary erasure channel and are decoded by iterative message-passing algorithms. In this pape ...

IEEE2020

From LDPC Block to LDPC Convolutional Codes: Capacity, Stability, and Universality

Wei Liu

In his landmark paper "A Mathematical Theory of Communication," the founding father of information theory and coding theory, Claude E. Shannon, established the largest rate at which reliable communication is possible and he revealed that the key to this re ...

EPFL2019

Error detection and correction

In information theory and coding theory with applications in computer science and telecommunication, error detection and correction (EDAC) or error control are techniques that enable reliable delivery of digital data over unreliable communication channels. Many communication channels are subject to channel noise, and thus errors may be introduced during transmission from the source to a receiver. Error detection techniques allow detecting such errors, while error correction enables reconstruction of the original data in many cases.

Low-density parity-check code

In information theory, a low-density parity-check (LDPC) code is a linear error correcting code, a method of transmitting a message over a noisy transmission channel. An LDPC code is constructed using a sparse Tanner graph (subclass of the bipartite graph). LDPC codes are , which means that practical constructions exist that allow the noise threshold to be set very close to the theoretical maximum (the Shannon limit) for a symmetric memoryless channel.

Error correction code

In computing, telecommunication, information theory, and coding theory, forward error correction (FEC) or channel coding is a technique used for controlling errors in data transmission over unreliable or noisy communication channels. The central idea is that the sender encodes the message in a redundant way, most often by using an error correction code or error correcting code (ECC). The redundancy allows the receiver not only to detect errors that may occur anywhere in the message, but often to correct a limited number of errors.