Publication

Modélisation stochastique de la solidification eutectique équiaxe

Related publications (46)

Vacancy segregation and intrinsic coordination defects at (111) twist grain boundaries in diamond

High radiation damage resistance has become increasingly important for applications of functional materials in harsh environments. The high radiation damage resistance diamond cubic carbon is a unique material which is considered for radiation environments ...

Oxford2023

Influence of depositional fabric on mechanical properties of naturally deposited sands

Gioacchino Viggiani

Fabric characteristics and shear deformation behaviour were analysed in four intact small-scale samples, including two disturbed and two undisturbed samples of naturally deposited sand from a shoal in the San Francisco Bay. Triaxial compression tests were ...

ICE PUBLISHING2022

Triplet grain growth in a-texture polycrystalline ZnO thin films

Cécile Hébert, Duncan Thomas Lindsay Alexander, Arthur Brian Aebersold

A growth of grain triplets is identified in vapor deposited, a-texture polycrystalline zinc oxide thin films, using a combination of transmission electron microscopy-based automated crystal orientation mapping and high-resolution imaging. Each triplet cons ...

2020

Template-assisted electrodeposition of nickel and nickel copper 3D microcomponents

Patrik Schürch

New types of metamaterials and architectured material require metallic materials with precise structural design in the microscale. However, additivemanufacturing of metallic structures in themicroscale has proven difficult, as the demand for the material q ...

EPFL2020

Abnormal Grain Growth in AlScN Thin Films Induced by Complexion Formation at Crystallite Interfaces

Paul Muralt, Ramin Matloub Aghdam, Silviu Cosmin Sandu, Stefan Mertin, Mohammad Fazel Parsapour Kolour, Vladimir Pashchenko

Sputter deposited Al(1-x)ScxN thin films with a Sc content from x = 0 to 43 at% are investigated by electron microscopy in order to study and explain the formation and growth of abnormally oriented grains (AOG). It is found that the latter did not nucleate ...

WILEY-V C H VERLAG GMBH2019

Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy

Christian Leinenbach

The microstructures of alloys created via Additive Manufacturing (AM) can vary substantially from those present in cast or wrought products, due to the very rapid solidification associated with AM. While numerous studies have investigated the process-micro ...

2018

Competition between intragranular and intergranular deformation mechanisms in ODS ferritic steels during hot deformation at high strain rate

Roland Logé

Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...

Springer Verlag2017

Synthesis and Sintering of ZnO Nanopowders

Paul Bowen, Michael Stuer, Zhe Zhao

Nanopowders are continuously under investigation as they open new perspectives in numerous fields. There are two main challenges to stimulating their development: sufficient low-cost, high throughput synthesis methods which lead to a production with well-d ...

Mdpi Ag2017

Grain boundary complexion and transparent polycrystalline alumina from an atomistic simulation perspective

Paul Bowen, Abhishek Tewari

Transparent alumina is often processed with sintering additives such as, Y, La, and Mg, in order to limit its grain growth at high sintering temperatures. Usually, these additives segregate to the grain boundaries due to their larger cationic size than Al ...

Elsevier2016

Modeling and characterization of grain structures and defects in solidification

Michel Rappaz

The paper by Karma and Tourret (this volume) in this special issue focuses on multiscale modeling approaches ranging from atoms to microstructure. In the present one, the most recent and significant modeling contributions dealing with the scale of solidifi ...

Elsevier2016

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.