Publication

Scanning excimer laser ablation of poly(ethylene terephthalate) (PET) and its application to rapid prototyping of channels for microfluidics

Related publications (43)

On the interaction of femtosecond laser pulses with layered dielectric materials

Materials properties are strictly dependent on their microstructure. The internal symmetries and the disposition of the constituting atoms of a material, which depend on its crystallographic structure, greatly affect its response to mechanical, electromagn ...

EPFL2023

Femtosecond laser-induced modifications and self-organization in complex glass systems

Gözden Torun

Ultrashort laser pulses, i.e., pulses emitted shorter than a picosecond, can tailor material properties by introducing permanent modifications locally in three dimensions. Remarkably, under a certain exposure condition, these modifications are accompanied ...

EPFL2023

Hybrid thermo-physical modelling and experimentation of ultrafast laser-based fabrication of polycrystalline core-amorphous shell nitinol nanoparticles

Sunil Kumar, Vinod Parmar

Ultrafast lasers pulses induced ablation of nickel-titanium (NiTi) alloy substrates immersed in deionized water yielded a high-throughput of polycrystalline core - amorphous shell NiTi nanoparticles (NPs) owing to the high pulse energy of femtosecond (fs) ...

ELSEVIER SCI LTD2023

Enhancement of Pressure-Sensitive Adhesive by CO2 Laser Treatment

Dario Floreano, Vivek Ramachandran, Yegor Piskarev, Jun Shintake, Michael Dickey, Jianhang Yang

Pressure-sensitive adhesives (PSAs) are polymeric films that can be adhered to and detached from surfaces without leaving residue. Researchers are looking to enhance the bond strength between PSAs and different substrates. It can be achieved by tuning PSA' ...

2022

Effect of femtosecond laser-induced high pressure on fused silica polymorphism

Arunkrishnan Radhakrishnan

High-pressure studies in silica are of great interest to earth and planetary sciences. Highpressure phases are rarely found in nature as a result of shock events like meteorite impacts orvolcanic events in nature. Recreating these phases remains a challeng ...

EPFL2022

Nanosecond pulsed laser-processing of CVD diamond

Patrik Willi Hoffmann, Marco Cantoni, Sébastien Equis

This work considers the resulting material structural effects of laser-processing chemical vapor deposited (CVD) diamond. The utilized 532 nm wavelength laser had a pulse duration of 40 ns together with a spot diameter of ca. 40 mu m. The effect of cutting ...

ELSEVIER SCI LTD2020

Laser coating of a Zr-based metallic glass on an aluminum substrate

Roland Logé, Stefano Mischler, Jamasp Jhabvala, Alejandro Roda Buch, Navid Sohrabi

Cladding of a Zr-based metallic glass (MG) on an aluminum substrate was conducted using a layer-wise laser additive manufacturing (AM) method, leading to relative densities higher than 99%. The thickness of the cladding was about 300 μm. The effect of lase ...

2020

Re-entry survival analysis and ground risk assessment of space debris considering by-products generation

Pénélope Leyland, Stefano Mischler, Seong-Hyeon Park

Space debris that re-enter the Earth's atmosphere can be partially or fully ablated along the trajectory path after hitting the atmosphere layers, once these become denser (approximately below 82 km). This paper combines re-entry survival analysis to by-pr ...

2020

Experimental Investigation of Pulsed Laser Deposition of Ferroelectric Gd:HfO2 in a CMOS BEOL Compatible Process

Mihai Adrian Ionescu, Igor Stolichnov, Eamon Patrick O'Connor, Matteo Cavalieri, Carlotta Gastaldi

In this work, we report an experimental investigation of pulsed laser deposition (PLD) of thin Gd:HfO2 layers at 330 degrees C, which show ferroelectric behavior after annealing at 450 degrees C, compatible with complementary metal-oxide-semiconductor back ...

AMER CHEMICAL SOC2020

Selective femtosecond laser ablation via two-photon fluorescence imaging through a multimode fiber

Demetri Psaltis, Christophe Moser, Damien Claude-Marie Loterie, Eirini Kakkava, Donald Benjaman Conkey, Marilisa Romito

We demonstrate the ability of a multimode fiber probe to provide two-photon fluorescence (TPF) imaging feedback that guides the femtosecond laser ablation (FLA) in biological samples for highly selective modifications. We implement the system through the p ...

OPTICAL SOC AMER2019

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.