Mechanical properties and microstructure of a high carbon steel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Fatigue cracks tend to initiate on the rebar surface and therefore, the surface conditions may control their fatigue behaviour. This study investigates the influence of surface microstructure and roughness dispersion on the scatter and fatigue life of hot ...
Nanoindentation tests were carried out on the surface of polymer nanocomposites exhibiting either graded or homogeneous distributions of Fe3O4@silica core-shell nanoparticles in a photocurable polymeric matrix. The results reveal a complex interplay betwee ...
Residual stress state in planar tubular K-joints, in the chord within the gap region between the two braces, is studied using numerical weld modelling. The motivation comes from past full-scale fatigue tests on tubular trusses made of various steel grades ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
An automatic method to colorize and quantify the classical Pitsch, Kurdjumov-Sachs, Greninger-Troiano and Nishiyama-Wasserman orientation relationships in the electron backscatter diffraction maps of martensitic/bainitic steels is detailed. Automatic analy ...
Micro-compression experiments were carried out on micro-pillars, with nominal diameter of 10 mu m and height 20 mu m, and fabricated from a high-chromium tempered martensitic steels developed for nuclear applications. An analytical method was proposed to c ...
Microstructural evolution of a cold-rolled Al-Mn-Fe-Si alloy during annealing was studied. Except the as-cast variant, two other different homogenizations were considered, one gave a high density of fine dispersiods providing a considerable Zener drag infl ...
Investigation of the microstructural evolution of Al-Mn-Fe-Si alloys during annealing after cold rolling has been carried out. The effect of microchemistry state in terms of Mn in solid solution, constituents, size and volume fraction of dispersoids, intro ...
Plane-strain tensile loading numerical simulations of dynamic crack propagation in silicon nitride microstructures are conducted. The strength and toughness are evaluated as a function of strain rate and microstructural parameters, including grain size and ...
We explore the influence of the metal microstructure on the compressive flow stress of replicated microcellular 400-mu m pore size Al-4.5 wt%Cu solidified at two different solidification cooling rates, in the as-cast and T6 conditions. It is found that the ...
