Publication
Durability of ternary binders based on Portland cement, calcium aluminate cement and calcium sulfate
Related publications (37)
Quantitative assessment of research data management practice - 2021
Francesco Varrato, Chiara Gabella, Eliane Ninfa Blumer
This survey aims to investigate research data management practices at EPFL and integrate their results into specific academic services. The previous two editions, in collaboration with TU Delft, Cambridge University and Illinois University, were carried ou ...
2022Resistance of cementitious materials to sulfate attack: quantifying performance with a reliable unidirectional approach
Depending on the environmental conditions, concrete materials can come into contact with sulfate ions which are widely present in rivers, underground water, sewers, seawater and soil. Sulfates can react with the cement paste in concrete and cause damage wh ...
EPFL2022The effect of alkali hydroxides and equilibration time on Al uptake by calcium silicate hydrates (C-S-H)
Cement production accounts for approximately 8% of man-made CO2 emissions. Lowering these CO2 emissions is currently one of the most important and urgent research topics within the cement community. To reduce these emissions, the Portland cement (PC) is pa ...
EPFL2021Limestone calcined clay cements (LC3): raw material processing, sulfate balance and hydration kinetics
Franco Alberto Zunino Sommariva
Limestone calcined clay cements (LC3) are blended cements that combine clinker, limestone, calcined clay and gypsum. The availability of the materials required to produce LC3 and the good performance that it achieves, makes LC3 suitable as a sustainable re ...
EPFL2020Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC
Karen Scrivener, Barbara Lothenbach
Blended cements, where Portland cement clinker is partially replaced by supplementary cementitious materials (SCMs), provide the most feasible route for reducing carbon dioxide emissions associated with concrete production. However, lowering the clinker co ...
SPRINGER2020Investigation of the use of Limestone Calcined Clay Cement (LC3) applied to Thailand
The replacement of clinker with supplementary cementitious materials (SCMs) is the most interesting solution to reduce the CO2 emissions from cement production. The abundant availability of clays, which have a sufficient amount of kaolinite content in Thai ...
EPFL2019