Publications related to Microchannel plate and its manufacturing method

Piezoelectric and elastic properties of Al0.60Sc0.40N thin films deposited on patterned metal electrodes

Luis Guillermo Villanueva Torrijo, Silvan Stettler, Marco Liffredo, Nan Xu, Federico Peretti

Sc-doped aluminum nitride (AlScN) allows for piezoelectric devices with large electromechanical coupling and the benefits increase with larger Sc doping in the film. However, with a larger Sc concentration, the process window narrows, and it is necessary t ...

2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Lithium tantalate photonic integrated circuits for volume manufacturing

Tobias Kippenberg, Mikhail Churaev, Xinru Ji, Zihan Li, Alisa Davydova, Junyin Zhang, Yang Chen, Xi Wang, Kai Huang, Chen Yang

Electro-optical photonic integrated circuits (PICs) based on lithium niobate (LiNbO3) have demonstrated the vast capabilities of materials with a high Pockels coefficient1,2. They enable linear and high-speed modulators operating at complementary metal–oxi ...

2024

High density lithium niobate photonic integrated circuits

Tobias Kippenberg, Rui Ning Wang, Anat Siddharth, Mikhail Churaev, Nikolai Kuznetsov, Zihan Li, Junyin Zhang, Zelin Tan

Photonic integrated circuits have the potential to pervade into multiple applications traditionally limited to bulk optics. Of particular interest for new applications are ferroelectrics such as Lithium Niobate, which exhibit a large Pockels effect, but ar ...

Nature Portfolio2023

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Marcus Cemes, Ambrine Douhane

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Integrated silicon photonic MEMS

Niels Quack, Hamed Sattari, Alain Yuji Takabayashi

Silicon photonics has emerged as a mature technology that is expected to play a key role in critical emerging applications, including very high data rate optical communications, distance sensing for autonomous vehicles, photonic-accelerated computing, and ...

SPRINGERNATURE2023

Diaryl ether compound and manufacturing method from lignin

Paul Joseph Dyson, Mingyang Liu

Herein described are diaryl ether compounds having the structure (I) as well as a method for their manufacture from lignin. ...

2023

Investigation of femtosecond laser-enabled 3D micro-infiltration processes

Enrico Casamenti

In the last decades, the femtosecond laser micromachining of glass has attracted a lot of attention due to its three-dimensional manufacturing ability and flexibility both in terms of compatible substrates and modification types. Yet, to fully unravel its ...

EPFL2022

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022