Etude par STM de la déposition d'agrégats d'or sur TiO2 et mesure de l'émission électronique secondaire induite par l'impact d'agrégats sur une surface
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We present a MEMS process for the fabrication of arbitrary (adaptable to specific aperture geometries) stabilization of silicon nitride membranes to be used as miniature shadow masks or (nano) stencils. Stabilization was realized by the fabrication of sili ...
Using infra-red (IR) thermography, power loads onto the MKII Gas-Box divertor targets have been investigated in Type-I ELMy H-Mode plasmas at JET in medium current discharges (I-p = 2.6MA and B-T = 2.7 T). Heat fluxes are calculated from the measured diver ...
The temperature dependence of the conductivity is investigated as a function of boron doping in large-grained, degenerate polycrystalline ZnO films prepared by low-pressure chemical vapor deposition. Carrier transport in undoped and lightly doped films is ...
In situ electron microscope observations of defects show that the incident high-energy electrons influence the evolution of microstructure of an irradiated material, reducing the number of defects seen in the field of view of the microscope. We investigate ...
Scanning tunneling microscopy (STM) has been used to investigate the nucleation and stability of iron clusters on the Al2O3/Ni3Al (111) surface as a function of coverage and annealing temperature. We show that atomic beam deposition of iron leads to hexago ...
The focused electron beam induced deposition process is a promising technique for nano and micro patterning. Electrons can be focused in sub-angström dimensions, which allows atomic-scale resolution imaging, analysis, and processing techniques. Before the ...
Strontium barium niobate (SrxBa1-xNb2O6, shortly SBN) is a solid solution system with tetragonal tungsten bronze crystal structure. It exhibits a ferroelectric phase with only one polar axis and a transition temperature depending on the Sr/Ba ratio. This t ...
Carbon nanofibers (CNF) were synthesized on sintered metal fibers (SMF) filters of nickel and Ni-containing alloys (Inconel, stainless steel (SS)) by thermal chemical vapor deposition of ethane in the presence of hydrogen at not, vert, similar660 °C. The C ...
Thin silicon oxide (SiOx) barrier coatings formed by plasma enhanced chemical vapor deposition on poly(ethylene terephthalate) (PET) substrates were subjected to post-deposition annealing treatments in the temperature range for orientation relaxation of th ...
Microscopic processes induced by the controlled deposition of mass selected silver clusters on graphite (HOPG) and Pt(111) are investigated. The implantation of silver clusters into the HOPG surface is analyzed. The first step consists in a systematic stud ...
