Comprehensive Thermodynamic Approach to Modelling Refrigerant–Lubricating Oil Mixtures
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In engineering practice, thermodynamic, economic and environmental aspects are taken into account either separately or in some limited combination during the different stages of energy system synthesis, design and operation. It would be beneficial, however ...
This project is evaluating a heat pump cycle with midstage injection at scroll compressors. The injected refrigerant is evaporated partially by an internal heat exchanger (fig. 2.1). A glycol-water heat pump with 12 kW heat capacity at B-5/W50 was built an ...
An understanding of the behaviour of saturated/unsaturated soils is important for the design and analysis of geostructures. In this paper a continuum approach based on a structured thermodynamic theory of mixtures developed by Svendsen & Hutter (1995), in ...
A computationally efficient and rigorous thermodynamic model (ISORROPIA) that predicts the physical state and composition of inorganic atmospheric aerosol is presented. The advantages of this particular model render it suitable for incorporation into urban ...
A summary of the objectives and conclusions reached in this project are: •A litterature search on post dryout heat transfer for pure refrigerants and for refrigerant-oil mixtures was performed and a comprehensive review written (Chapters 9, 10, and 11); •T ...
Intube flow boiling experiments for refrigerant R-134a mixed with a lubricating oil are reported for a plain, horizontal tube. The tests were run at a nominal inlet pressure of 3.4 bar over a wide range of vapor qualities at mass velocities of 100, 200, an ...
The infrared and Raman spectra of CaCO3 calcite substituted with 80% O-18 have been recorded. A detailed mode assignment is proposed for all the observed bands, including combinations and overtones. These data are used to propose a simplified model of the ...
The substitution of CFC refrigerants in refrigeration systems, heat pumps and organic Rankine cycles for heat recovery, requires good methods for predicting heat transfer of substitute fluids. The measurements in the LENI test facility (concentric tubes wi ...
Specific volumes of forsterite and San Carlos olivine have been measured by in-situ X-ray diffraction at simultaneously high pressure and high temperature up to 7 GPa and 1300 K in a cubic-anvil press coupled to synchrotron radiation. No difference could b ...
The industrial conversion to new alternative refrigerants is now one of the major driving forces in two-phase flow and boiling heat transfer research. A state-of- the-art review is presented here to quantify what has been done so far, assess the strengths ...