Comprehensive Thermodynamic Approach to Modelling Refrigerant–Lubricating Oil Mixtures
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This project is evaluating a heat pump cycle with midstage injection at scroll compressors. The injected refrigerant is evaporated partially by an internal heat exchanger (fig. 2.1). A glycol-water heat pump with 12 kW heat capacity at B-5/W50 was built an ...
A computationally efficient and rigorous thermodynamic model (ISORROPIA) that predicts the physical state and composition of inorganic atmospheric aerosol is presented. The advantages of this particular model render it suitable for incorporation into urban ...
An understanding of the behaviour of saturated/unsaturated soils is important for the design and analysis of geostructures. In this paper a continuum approach based on a structured thermodynamic theory of mixtures developed by Svendsen & Hutter (1995), in ...
Intube flow boiling experiments for refrigerant R-134a mixed with a lubricating oil are reported for a plain, horizontal tube. The tests were run at a nominal inlet pressure of 3.4 bar over a wide range of vapor qualities at mass velocities of 100, 200, an ...
In engineering practice, thermodynamic, economic and environmental aspects are taken into account either separately or in some limited combination during the different stages of energy system synthesis, design and operation. It would be beneficial, however ...
The substitution of CFC refrigerants in refrigeration systems, heat pumps and organic Rankine cycles for heat recovery, requires good methods for predicting heat transfer of substitute fluids. The measurements in the LENI test facility (concentric tubes wi ...
Specific volumes of forsterite and San Carlos olivine have been measured by in-situ X-ray diffraction at simultaneously high pressure and high temperature up to 7 GPa and 1300 K in a cubic-anvil press coupled to synchrotron radiation. No difference could b ...
A summary of the objectives and conclusions reached in this project are: •A litterature search on post dryout heat transfer for pure refrigerants and for refrigerant-oil mixtures was performed and a comprehensive review written (Chapters 9, 10, and 11); •T ...
The infrared and Raman spectra of CaCO3 calcite substituted with 80% O-18 have been recorded. A detailed mode assignment is proposed for all the observed bands, including combinations and overtones. These data are used to propose a simplified model of the ...
The industrial conversion to new alternative refrigerants is now one of the major driving forces in two-phase flow and boiling heat transfer research. A state-of- the-art review is presented here to quantify what has been done so far, assess the strengths ...