Publication
Submicrometer Hall devices fabricated by focused electron-beam-induced deposition
Jürgen Brugger, Patrik Willi Hoffmann, Giovanni Boero, Niels Quack, Radivoje Popovic, Pavel Kejik, Schahrazede-Lila Mouaziz, Tristan Bret
2005
Journal paper
2005
Journal paper
Abstract
Hall devices having an active area of about (500 nm)(2) are fabricated by focused electron-beam-induced deposition. The deposited material consists of cobalt nanoparticles in a carbonaceous matrix. The realized devices have, at room temperature, a current sensitivity of about 1 V/AT, a resistance of a few kilo-ohms, and can be biased with a maximum current of about 1 mA. The room-temperature magnetic field resolution is about 10 muT/Hz(1/2) at frequencies above 1 kHz.
Official source
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Ontological neighbourhood
Related concepts (20)
International System of Units
The International System of Units, internationally known by the abbreviation SI (for Système International), is the modern form of the metric system and the world's most widely used system of measurement. Established and maintained by the General Conference on Weights and Measures (CGPM), it is the only system of measurement with an official status in nearly every country in the world, employed in science, technology, industry, and everyday commerce.
Metric system
The metric system is a system of measurement that succeeded the decimalised system based on the metre, which had been introduced in France in the 1790s. The historical development of these systems culminated in the definition of the International System of Units (SI) in the mid-20th century, under the oversight of an international standards body. Adopting the metric system is known as metrication. The historical evolution of metric systems has resulted in the recognition of several principles.
History of the metric system
The history of the metric system began during the Age of Enlightenment with measures of length and weight derived from nature, along with their decimal multiples and fractions. The system became the standard of France and Europe within half a century. Other measures with unity ratios were added, and the system went on to be adopted across the world. The first practical realisation of the metric system came in 1799, during the French Revolution, after the existing system of measures had become impractical for trade, and was replaced by a decimal system based on the kilogram and the metre.
Related publications (33)
Disentangling Light- and Temperature-Induced Thermal Effects in Colloidal Au Nanoparticles
Majed Chergui, Lijie Wang, Davood Zare
We present temperature-dependent (from room temperature to 80 degrees C) absorption spectra of Au/SiO2 core-shell nanoparticles (NPs) (core diameter: similar to 25 nm) in water in the range from 1.5 to 4.5 eV, which spans the localized surface plasmon reso ...
AMER CHEMICAL SOC2022Challenges and Applications to Operando and In Situ TEM Imaging and Spectroscopic Capabilities in a Cryogenic Temperature Range
Vasiliki Tileli, Martial Duchamp, Reinis Ignatans
In this Account, we describe the challenges and promising applications of transmission electron microscopy (TEM) imaging and spectroscopy at cryogenic temperatures. Our work focuses on two areas of application: the delay of electron-beam-induced degradatio ...
AMER CHEMICAL SOC2021Performance of GaN Power Devices for Cryogenic Applications Down to 4.2 K
Elison de Nazareth Matioli, Luca Nela, Palliyage Srilak Nirmana Perera, Catherine Erine
Gallium nitride (GaN) power devices are employed in an increasing number of applications thanks to their excellent performance. Nevertheless, their potential for cryogenic applications, such as space, aviation, and superconducting systems, has not yet been ...
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021Related MOOCs (8)
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Plasma Physics: Applications
Learn about plasma applications from nuclear fusion powering the sun, to making integrated circuits, to generating electricity.