A self-assembled monolayer-assisted surface microfabrication and release technique
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Sub-micron lithography processes are continuously optimized for semiconductor products where the enormous market potential justifies investment in advanced methods and extremely sophisticated equipment. Due to the extreme process costs and due to the limit ...
A release technique that enables to lift microfabricated structures mechanically off the surface without using wet chemistry is presented. A self-assembled monolayer of dodecyltrichlorosilane forms a very uniform 1.5-nm-thick anti-adhesion coating on the s ...
Polymers have the ability to conform to surface contours down to a few nanometres. We studied the filling of transparent epoxy-type EPON SU-8 into nanoscale apertures made in a thin metal film as a new method for polymer/metal near-field optical structures ...
The present work analyses silicon oxide coated polyester films, with attention paid to the effect of substrate process additives on the coating defect population, and on the coated film mechanical properties. The defect population is characterized by means ...
An epitaxial 200 nm thick film of Pb(Zr0.40Ti0.60)O-3 (PZT) has been deposited by reactive rf magnetron sputtering on conductive Nb-doped SrTiO3 (100) (STO). The patterning process involved electron-beam lithography of polymethylmethacrylate, fabrication o ...
Many fundamental processes that govern the function of biological cells occur on or immediately under the cell membrane. Fluorescence marking of specific sites has had a large impact in the recognition of these processes. In addition, observation in an app ...
Patterning with lithographic processes requires processing steps including the use of resist spinning and chemical solvents for the development of resist. These steps cannot be applied to mechanical fragile and bio/chemically functional surface layers such ...
This thesis deals with the development of microfabrication technologies based on photoplastic structuring by lithographic and molding techniques. These technologies, combined with an original releasing method, allow for the simple fabrication of pseudo thr ...
A new approach for the realization of true 3D polymer structures is presented in this paper. It consists in adding, in a post-processing microstereolithography step, 3D polymer microstructures on top of a micropart patterned by means of planar processes su ...
Single crystals of layered semiconductors such as WS2 and MoS2 have already proven their efficiency as active elements in photovoltaic cells. Due to their high optical absorption coefficient in the visible range, these materials could be used in the form o ...
