Publications related to Heterogeneous material micro-transfer by ink-jet print assisted mould filling

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

A systemic study for enhanced waste heat recovery and renewable energy integration towards decarbonizing the aluminium industry

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier

The aluminium remelting industry relies on natural gas to transform recycled aluminium into aluminium feedstock, entailing significant atmospheric emissions. Hydric resources are also affected as they are used as sinks of waste heat from the casting proces ...

2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Bringing casting to microfabrication: processing and deformation of microcastings

Luciano Borasi

This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...

EPFL2023

A multi-material robotic finger with integrated proprioceptive and tactile capabilities produced with a circular process

Josephine Anna Eleanor Hughes, Kai Christian Junge, Antonia Georgopoulou Papadonikolaki

When developing or designing biomimetic robotic fingers with rigid and soft components and integrated sensors, fabrication is often a bottle-neck when assembling and casting processing techniques are used. This study introduces a thermoplastic multi-materi ...

IEEE2023

Dataset for 'Printed ecoresorbable temperature sensors for environmental monitoring'

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Melissa Kossairi

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Printed ecoresorbable temperature sensors for environmental monitoring”. This work aims to study the effect ...

Zenodo2023

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Danick Briand, Luis Guillermo Villanueva Torrijo, Morgan Mc Kay Monroe

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

2023

Photocured Nanocellulose Composites: Recent Advances

Yves Leterrier, Aigoul Schreier, Mohammed Arif Poothanari, Julien Bras

This perspective gives an overview of recent progress in thefield of photocured polymer composites based on variousforms of nanocelluloses, with a focus on cellulose nanofibrils. The manufacturing processes and performances of these nanocellulosecomposites ...

AMER CHEMICAL SOC2022

Ultra-Compact Ka-band Metamaterial Waveguide Filters, Fabricated by Lost-Wax Casting

Romain Christophe Rémy Fleury, Maliheh Khatibi Moghaddam

This paper proposes a novel technique for the design of miniaturized Ka-band filters based on locally resonant metamaterials (LRMs), which are fabricated monolithically using lost wax casting. We implement ultra-small metamaterial filters by exploiting a n ...

IEEE2021

A Contribution to the Design of Textile Reinforced Concrete Structures

Patrick Lorenzo Valeri

The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...

EPFL2020