Thiol-targeted microspray mass spectrometry of peptides and proteins through on-line EC-tagging

Loïc Dayon
EPFL, 2006
EPFL thesis

Abstract

Modification strategies targeting specific amino acids in proteins are widespread in proteomic analysis. Cysteine residues have received deep consideration in view of their nucleophilic properties and their occurrence in the proteome. A recently developed micro-electrospray emitter for mass spectrometry was used to electrogenerate species reactive towards specific residues in biomolecules. When spraying L-cysteine in the presence of hydroquinone, the thiol cysteine moiety reacts via a 1,4-Michael addition with the benzoquinone electrochemically generated at the electrode. A series of electrogenerated selective electrophiles based on substituted benzoquinones was characterized as tags for L-cysteine. The rate constants pertaining to the addition of L-cysteine onto the benzoquinones were determined through electrochemical techniques. It was shown that the rate constants are primarily dependent on the electronic nature of the substituents. The apparent tagging extents observed for L-cysteine in microspray mass spectrometry experiments were shown to be highly dependent of the ionization efficiencies of the tag. The on-line mass spectrometric electrochemical tagging (EC-tagging) of cysteine residues was studied for peptides. The EC-tagging was tested with the different hydroquinones on an undecapeptide containing one cysteine residue. Methoxycarbonyl-1,4-hydroquinone was shown to be the most efficient probe and revealed to be suitable to count cysteine units in peptides containing up to three cysteines. The number of cysteines corresponds to the number of characteristic mass shifts observed from the unmodified peptide. The identification of bovine serum albumin and human a-lactalbumin digest samples in a peptide mapping strategy were greatly improved by the application of the EC-tagging technique as post-column treatment. Indeed, the determination of cysteine content in the tryptic peptides provides powerful supplementary information to the masses. The tagging method was applied to the determination of four proteins in a model mixture. In parallel, the microspray emitter was characterized as an electrolysis flow cell for the EC-tagging of peptides. The Levich equation was validated as a first approximation for the calculation of the convection-diffusion limiting current in the device. A finite element simulation of the multi-tagging process of peptides was developed to yield the relative distribution and concentration of tags, untagged and tagged species in the microchannel. The main chemical parameters determining the kinetics of the labelling were assessed and discussed considering the microfluidic aspects of the process. The control of the tagging extent allows the simultaneous mass spectrometric analysis of both the unmodified and of the modified peptide(s). This theoretical work has established the range of optimum conditions for the determination of the number of cysteines in peptides containing up to five cysteine groups. The mass spectrometric EC-tagging of cysteine residues in proteins was studied to probe the cysteine environment. An analytical model was developed to calculate rapidly the tagging extent before the spray event. Experiments with unmodified proteins and their chemically reduced forms have highlighted the strong effect of the cysteine site reactivity on the tagging efficiencies. This study has shown relevant parameters for such on-line electrochemical derivatization / mass spectrometric detection strategies. The chemical derivatization of cysteines by benzoquinone reagents was also investigated. These alkylating reagents revealed efficient for diagonal liquid chromatography to isolate cysteinyl peptides by the retention time shifts due to the hydrophobicity of the tags. The work has demonstrated that the inherent electrochemistry of the electrospray can be employed as post column treatment to derivatize cysteinyl biomolecules. Analytical strategies have been developed to take advantage of this electrochemically-controlled modification.

Official source

https://infoscience.epfl.ch/record/83512?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Loïc Dayon
EPFL, 2006
EPFL thesis

Abstract

Official source

https://infoscience.epfl.ch/record/83512?ln=en

About this result

Related concepts (21)

Related concepts

Related publications (27)

Related publications

In the context of prefractionation methods for proteomics, this work deals mainly with the development of electrophoretic tools for isoelectric focusing of peptides and proteins for the analysis of biological mixtures. In the light of existing devices for isoelectric focusing (IEF), the objective has been to develop multicompartment devices, designed for the IEF of peptides and proteins. The first choice of the OFFGEL for IEF among other techniques is justified by the easy recovery of liquid fractions of peptides, of small volumes, further amenable to liquid chromatography (as a second dimension separation) or mass spectrometry analyses. The resolution is a key point to consider in the design of separation units. Finite element simulation of the isoelectric focusing of peptides by OFFGEL has allowed the design of a multicompartment OFFGEL device for high resolution separation of peptides. The numerical simulations have highlighted the importance of the mobility near pI for the IEF kinetics and the final peak shape. The calculation of the distribution of peptides mobility near pI for three proteomes has allowed concluding on the optimal width of the well to obtain best separation. This mathematical study has also illustrated the high focusing power of the OFFGEL technique as a separation tool for shotgun proteomics application. The design of a multicompartment OFFGEL device was then done, based on the results of the simulations. The reproducibility of the pH gradient was validated, the loading capacity was evaluated for proteins, and a demonstration of the high resolution separation of peptides and proteins from a complex biological mixture was performed. The OFFGEL separation was then integrated in a workflow combining chemical tagging of the cysteine residues. This approach showed that the high resolution of peptide OFFGEL and the added information on the sequence of the peptides permitted a more confident and accurate protein identification. In the context of gel-free proteomics, another separation cell has been designed, that enables performing isoelectric focusing without the need of an immobilized pH gradient (IPG) gel. The novel device has been characterized in terms of performances and has been be applied to a biological sample of Escherichia coli, showing a more rapid separation of proteins than OFFGEL IEF, thus demonstrating its potential for fast proteome prefractionation purposes. An electrochemical cell has also been designed, for the transfer of ionizable species by electrochemistry at the micro-interface of two immiscible electrolytes (µ-ITIES), supported by an IPG gel as the aqueous phase and a small drop of organic phase. This study was initially motivated by the aim of performing online extraction of proteins/peptides during IEF separation. The use of this device for the transfer of model molecules was demonstrated, opening the door to further developments concerning the electrochemical transfer of proteins.

EPFL2008

Polymer nanospray interfaces for on-line electrochemically induced modifications

Tatiana Rohner

The aim of this work has been to design, and fabricate a miniaturized electrospray-type interface for mass spectrometry analysis, which allows the nebulization of solutions by applying a high potential difference between the source and the mass spectrometer. The fabrication of the nanospray emitter is based on UV-laser photoablation of polymer substrates. Thick-film channel flow electrodes can be integrated in the microfluidic system, allowing the application of a high voltage to generate electrospray from the open outlet of the microchannel. The polymer-based interface first presented is characterized by a flat edge interface. However, a V-shaped nozzle has been found to present higher stability and ease of use. This design also allows the generation of spray by applying high voltage through an electrode located in a solution reservoir, thereby inducing an electroosmotic pumping. Taking advantage of the intrinsic electrolytic behavior of electrospray, a specific electrochemically induced tagging of free cysteine residues located in proteins can be performed on-line. A p-hydroquinone buffer is used to perform a continuous infusion of protein solution. When in contact with the high-voltage microelectrode, p-hydroquinone undergoes oxidation, thereby producing protonated p-benzoquinone. The latter reacts with free cysteine residues, following a Michael-type addition. The modification of the protein can be followed thanks to MS analyses. A complete study of the mechanisms involved in the electrochemically induced tagging with hydroquinone has been carried out by cyclic voltammetry and digital simulation. The process of the tagging consists of an ECE mechanism, since the formed adduct is stabilized in the reduced state, and is thus free to be oxidized. The rate constant of the chemical reaction has been extracted, by performing cyclic voltammetry studies and modeling the whole system by digital simulations. Finite element simulations have also permitted to highlight several mechanistic aspects of the electrotagging. The nanospray interface has been modeled as a channel-flow electrode cell. After validation of the model with respect to the experimental results, kinetics and mass transport conditions have been investigated. The flow profile, as well as the kinetic rate constant, has been shown to be of great importance in the electrochemically induced tagging. The use of a sacrificial electrode as metallic ion source to generate electrospray has also been investigated. Transition metal electrodes, i.e. copper, zinc, nickel and iron, as well as silver, were used to get on-line complexation with model peptides. It has been demonstrated that the use of in-reservoir sacrificial electrode was an efficient method to generate metal ions in order to form complexes with peptides, without the addition of metallic salts. These studies have demonstrated that polymer nanospray interfaces can be advantageously used as analytical devices, together with their primary function, i.e. ionization sources for protein analyses by mass spectrometry.

EPFL2003

Middle-down approaches for mass spectrometry-based protein identification and characterization

Kristina Srzentic

Mass spectrometry (MS) has emerged over the last two decades as the analytical technique of choice in systems-level protein studies, known as proteomics. Two are the MS-based approaches generally applied to proteomics: bottom-up (BU), which relies on the proteolytic digestion of proteins into short (~10 amino acids) peptides, and top-down (TD), where proteolysis is omitted, intact proteins are detected and fragmented in gas phase. Both methods present advantages as well as drawbacks. Here, we sought to establish a complete platform to put forward a third MS-based proteomic approach; middle-down (MD). It implies protein digestion as in BU, but aims to generate large peptides which size approaches the one of small intact proteins that are readily analyzed in TD. This novel domain aims to account for the shortcoming of both classical approaches. Until now, the main reasons behind the limited use of MD proteomics have been the lack of easy-to-use cleaving agents capable of producing peptides in the desired 3-15 kDa mass range with high specificity, limitations in MS and allied instrumentation, and the absence of dedicated bioinformatics tools for processing of acquired data. The latter greatly impedes the next milestone in MD proteomics â large-scale analysis. MD can potentially combine the analysis of large portions of proteins carrying set of biologically-relevant modifications â allowing exploring proteins of molecular weight or complexity incompatible with current TD capabilities â with the high-throughput hallmark of BU proteomics. Here, we first in silico evaluated the potential target amino acid residues to produce peptides in the MD mass range within the proteomes of different organisms. This bioinformatics work was followed by an experimental study based on synthetic MD-sized peptides, aimed at determining the optimal MS and tandem MS parameters for large peptide characterization. Next, we pursued two distinct ways of performing MD proteolysis: i) the use of an enzyme and ii) the use of a chemical reagent. We selected the protease Sap9 as a target enzyme for MD, which we fully characterized and successfully applied to the study of a mixture of monoclonal antibodies, where it showed an advantage over traditional BU in terms of reduced introduction of artifacts to the sample, allowing the post-translational modification investigation and unambiguous antibody identification. The chemical cleavage way we addressed via judicious protocol optimization for hydrolysis at the N-terminal side of cysteine with NTCB reagent. We also advanced MD protocols by generation of large (~50 kDa) subunits of monoclonal antibodies through the use of papain and another more specific novel protease, GingisKHAN, combined with new MS signal processing and data analysis capabilities. The developed workflow improved mapping of the connectivity of cysteines involved in inter- and intra-molecular disulfide bridges in antibodies. To summarize, we demonstrated that MD approach to mass spectrometry and proteomics is a powerful, yet underdeveloped, complement to BU and TD. This work has benchmarked MD for targeted protein analysis. In the near future, with advancements of the field, we envision its growing use for large-scale complex proteome analysis.

EPFL2016